User Manual

Vax Service line
AU: 1300 361 505 / NZ: 0800 800 9007
Maintenance
(
Keep your Vax as good as new
)
Clearing blockages
WARNING: To reduce the risk of electric shock, the power cord must be disconnected
before performing maintenance/troubleshooting checks. Turn the vacuum cleaner off and
unplug from the electrical socket.
Turn the Turbo tool over and
slide off the locking ring.
Switch the vacuum cleaner off and disconnect the power plug
from the electrical outlet.
Lay the Turbo brush on a flat surface and turn over to expose the
brushbar. Using a pair of scissors, cut through any threads or
hairs caught around the brushes and brushbar.
Be careful not to cut through the brush bristles.
Detach lower housing and
remove blockage.
To re-assemble the Turbo tool,
ensure that the tabs are
engaged and pivot the lower
housing closed. Slip the locking
ring over the neck of the Turbo
tool and into the groove to finish.
Hose blockages
The flexible hose may be disconnected
from the vacuum cleaner. Carefully remove
any blockages found and reconnect the
hose securely.
Accessory blockages
Remove accessory from the hose/telescopic
tube. Carefully remove the blockage and
return to the cleaner.
Removing blockages from the Turbo tool (some models only)
Removing blockages from the Turbo brush (some models only)