Technical data

Within a few moments the console terminal should display a series of
numbers as the system tests itself. The example in Figure 47 shows
that display after successful testing.
Figure 47: Successful System Self-Tests
KA670-A Vn.n, VMB n.n
Performing normal system tests.
66..65..64..63..62..61..60..59..58..57..56..55..54..53..52..51..
50..49..48..47..46..45..44..43..42..41..40..39..38..37..36..35..
34..33..32..31..30..29..28..27..26..25..24..23..22..21..20..19..
18..17..16..15..14..13..12..11..10..09..08..07..06..05..04..03..
Tests completed.
>>>
If the self-tests do not start or do not complete successfully as shown
in Figure 47, your system may have a problem. For instructions on
finding the source of the problem, refer to your system Troubleshooting
and Diagnostics manual which is included in the Customer Hardware
Information Kit.
5. If the self-tests complete successfully and you want to save the language
you selected (so you need not select it each time you turn on the system),
turn the Power-Up Mode switch to Run mode, which is indicated by an
arrow on the console module as shown in Figure 48.
66 VAX 4000 Model 300 Installation