Technical data

Options (Cont.)
DSV11, 14
IBQ01–SA, 15
IEQ11, 15
KA670–AA, 14
KA670–BA, 14
KDA50, 14
KFQSA, 14
KLESI, 14
KRQ50, 14
KWV11, 15
KZQSA, 14
LPV11, 15
MRV11, 14
MS670–BA, 14
MS670–CA, 14
TQK50, 14
TQK70, 14
TSV05, 14
VCB02, 15
P
Parallel printers, connecting, 19
Positioning system, 4
Post-installation procedures, 68
Power cable
See System power cable
Power control bus cable, connecting,
53
Power supply
See System power supply
Pre-operational procedures, 68
Pre-startup requirements, VMS
factory-installed software, A–1
Printers
parallel, connecting, 19
serial, connecting, 16
Q
Q-bus cable, connecting, 48
R
RJ11C/CA11A, RJ12C/CA12A, and
RJ13C/CA13A telephone
service, 22
RJ41S/CA41A and RJ45S/CA45A
data-jack telephone service, 22
S
SCP
See System control panel
Selecting language, 64
Serial printers, connecting, 16
Setting system controls, 9
console module, 10
Integrated Storage Elements, 10
power supply, 9
system control panel, 10
tape drives, 12
Setting up terminal lines, DFA01
modem, 30
Setup operations, console terminal,
7
Shipment, checking, 1
Site preparation, verifying, 1
Software, system
See VMS factory-installed
software
Standard Ethernet cable, connecting
console module, 35
DESQA module, 44
Starting and modifying VMS factory-
installed software, A–1
Startup procedure, VMS factory-
installed software, A–2
Synchronous modems, connecting,
20
System
control panel, setting controls, 10
controls, setting, 9
doors, closing, 67
doors, opening, 5
expander connections, 45
positioning, 4
power cable, connecting, 62
power supply, setting controls, 9
Index–5