Operation Manual

6vax.co.uk
Looking after your machine - Filters
Cleaning the post-motor lter
Cleaning the HEPA pre-motor lter
WARNING: Do not wash the post-motor lter.
IMPORTANT: The motor is equipped with a thermal cut-out. If for any reason the unit should overheat, the thermostat
will automatically turn the unit o. Should this occur, unplug the vacuum cleaner from the electrical socket and turn o
the switch. Remove and empty the dirt container. Check the hose for blockages. Clean the lters. Allow the unit to cool
for approximately one hour (if you have cleaned the lters you will need to wait twenty four hours for the lters to dry
before putting them back in the machine). To re-start the machine, plug it into an electrical socket and switch it back on.
tap
24hr
1
2
tap
40 C max
o