Installation Sheet

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
.stnemeriuqer gnidnuorg dna gniriw rof sedoc lacirtcele lacol tlusnoc ,gnillatsni erofeB .1 :SETON
2. READ AND SAVE THESE INSTRUCTIONS.
C0204
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
Hardware Package (included):
Turn off the power at fuse or circuit box
Turn on the power at fuse or circuit box
Installation Steps
181206
1. Thread two fixture mounting screws to the mounting strap,
and secure them with two lock nuts, Adjust the length of
the fixture mounting screws if necessary.
2. Attach the mounting strap to the outlet box by using two
mounting screws.
3. Pull out the outlet wires and the house grounding wire
from the outlet box. Make wire connections by using
the wire connectors:
---Connect the black (hot) wire from the fixture to the
black (hot) wire from the power source.
---Connect the white (neutral) wire from the fixture to the
white (neutral) wire from the power source.
---Attach the fixture grounding wire to the mounting strap
with the green grounding screw. Then connect it to
the house grounding wire with a wire connector.
Carefully put the wires back into the outlet box.
4. Attach the back plate to the mounting strap by inserting the fixture
mounting screws, then secure it with two ball nuts.
5. Attach the glass shade onto the glass bracket, secure it with a socket ring.
6. Install a bulb (not included). See relamping label at socket area or packaging for maximum allowed wattage.
7. Turn on the power at the main fuse or circuit breaker box.
Lock Nut (E)
Mounting Screw (B)
Wire Connector (F)
Ball Nut (G)
Green Grounding
Screw (C)
Fixture Mounting
Screw (D)
Glass bracket
Bulb Type A Max.60W
(not included)
Canopy
Mounting Screw (B)
Mounting Strap (A)
House Grounding Wire
Green Grounding Screw (C)
Fixture Grounding Wire
Wire Connector (F)
Outlet Box
Fixture Wire
Socket Ring
Glass Shade
Fixture Mounting Screw (D)
Lock Nut (E)
Ball Nut (G)
Mounting Strap (A)