Installation Guide

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
P0341
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
Hardware Package (included):
Turn off the power at fuse or circuit box.
Installation Steps
Loop Lock (K)
Loop Lock (K)
Outlet Box
House Ground Wire
Wire Connector (E)
Fixture Wire
Fixture Ground Wire
Mounting Strap (A)
Green Ground Screw (C)
Mounting Screw (B)
Threaded Pipe (F)
Canopy (G)
Hex Nut(D)
Washer(J)
Collar (I)
Chain (L)
Loop
Rod
Coupling
Threaded
Pipe-b
Hex Nut
Threaded Pipe-a
Fixture
Top Loop (H)
1. Lock the threaded pipe-a on the coupling and fix it with
a hex nut.
2. Use rod passes through the threaded pipe-a and fix it
with loop.
3. Screw 12 decorative rods to the other threaded pipes-b of fixture.
4. Attach the threaded pipe (F) to the mounting strap (A),
then secure it with a washer (J) and hex nut (D).
5. Attach the mounting strap (A) to the outlet box by
using two mounting screws (B).
6. Secure the top loop (H) to the threaded pipe (F).
7. Connect the chain (L):
- Determine needed length of chain (L) to achieve
desired fixture height (remove excess chain
section by using pliers to bend link open.)
- Weave the fixture wires and fixture ground wire
through the chain (L), collar (I) and canopy (G).
8. Connect one end of the chain (L) to the loop using
a loop lock (K).
9. Connect the other end of the chain (L) to top loop (H) by using the other loop lock (K).
Mounting Strap (A) Mounting Screw (B) Green Ground
Screw (C)
Hex Nut (D) Wire Connector (E)
Canopy (G) Top Loop (H) Collar (I)
Threaded Pipe (F)
Washer (J)
Loop Lock (K)
Chain (L)
Socket
Max.60W Vintage Bulb
(not included)
Decorative
Rod
200902