Installation Guide

10. Thread the fixture wire and fixture ground wire through the top loop (H), threaded pipe (F) and mounting strap (A).
11. Pull out the source wires from the outlet box. Make wire connections using wire connectors (E) as follows:
---Connect the smooth-coated wire (marked) from the fixture to the black wire from the power source.
---Connect the ribbed-coated wire (unmarked) from the fixture to the white wire from the power source.
---Attach the fixture grounding wire to the mounting strap (A) with the green ground screw (C). Then connect
it to the house ground wire with a wire connector (E).
Carefully put the wires back into the outlet box.
12. Attach the canopy (G) to the mounting strap (A) by inserting the top loop (H), then secure it with the collar (I).
13. Install bulbs (not included). See relamping label at socket area or packaging for maximum wattage allowed.
200902
Turn on the power at fuse or circuit box.
The following parts are available for re-order if damaged or missing.
Spare Parts List:
Mounting Strap (A) Mounting Screw (B) Green Ground
Screw (C)
Hex Nut (D) Wire Connector (E)
Canopy (G) Top Loop (H) Collar (I)
Threaded Pipe (F)
Washer (J)
Loop Lock (K)
Mounting Hardware
6285MM (1SET)
Chain (L)
3251CN
A
B
A: 38”
B: 26-3/4”
Decorative Rod
172mm
3249RD