Installation Sheet

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THIS INSTRUCTION.
P0347
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
Hardware Package (included):
Turn off the power at fuse or circuit box
Installation Steps
1
. Attach the mounting plate unit (A) to the outlet box by
using two mounting screws (B).
2. Rod connections:
a. Thread the fixture wires from the fixture through the
lower rod, then secure the lower rod onto the fixture
using the threaded pipe.
b. Thread the fixture wires through the middle rod,
then secure the middle rod onto the lower rod
using the threaded pipe.
c. Thread the fixture wires through the upper rod,
then secure the upper rod onto the middle rod
using the threaded pipe.
d. Thread the fixture wire through coupling kit, canopy
unit, then secure the rod assembly to the coupling kit.
Note: Length adjustable from 20" to 81".
Use fewer rods if shorter length is desired.
3. Pull out the source wires from the outlet box.
Make wire connections using wire connectors (C)
as follows:
---Connect the smooth-coated wire (marked) from
the fixture to the black wire from the power source.
---Connect the ribbed-coated wire (unmarked) from
the fixture to the white wire from the power source.
---Attach the fixture ground wire to the mounting plate
unit (A) with the green ground screw, then connect
it to the house ground wire with a wire connector (C).
Carefully put the wires back into the outlet box.
210707
Bolt Nut (D)
Mounting plate Unit (A) Mounting Screw (B)
Wire Connector (C)
House Ground Wire
Fixture Ground Wire
Fixture Mounting Screw
Wire Connector (C)
Mounting Plate Unit (A)
Green Ground Screw
Mounting Screw (B)
Canopy Unit
Bolt Nut (D)
Outlet Box
Upper Rod
Middle Rod
Lower Rod
Threaded Pipe
Threaded Pipe
Threaded Pipe
Coupling Kit
Max.60W
Candelabra Base
Bulb
(not included)

Summary of content (2 pages)