Installation Sheet

210319
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THIS INSTRUCTION.
P0355
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
Turn off the power at fuse or circuit box.
Installation Steps
Hardware Package(inculded):
Canopy (D)
Loop Lock (E)
Loop Lock (E)
Loop
Tube
Fixture
Chain (F)
Threaded Pipe
Max.40W
Type B Bulb
(not included)
Outlet Box
Housing Ground Wire
Wire Connector (C)
Fixture Wire
Fixture Ground Wire
Mounting Strap Unit (A)
Green Ground Screw
Mounting Screw (B)
Threaded Pipe
Hex Nut
Washer
Top Loop
Collar
Mounting Strap Unit (A) Wire Connector (C)
Mounting Screw (B)
Canopy (D)
Loop Lock (E)
Chain (F)
1. Attach the mounting strap unit (A) to the outlet box
using two mounting screws (B).
2. Choose the length of the chain (F) you need,
then weave the fixture wire and the fixture
ground wire through the chain (F), collar
and canopy (D).
3. Screw the tube to the threaded pipe.
4. Connect one end of the chain (F) with the loop by
using a loop lock (E).
5. Connect the other end of the chain (F) with the
top loop by using another loop lock (E).
6. Thread the fixture wire and fixture ground wire
through the top loop, threaded pipe and
mounting strap unit (A).
7. Pull out the outlet wires and house ground
wire from the outlet box. Make wire
connections using the wire connectors (C):
---The smooth wire (marked) from the fixture
to the black wire from the power source.
---The ridged wire (unmarked) from the fixture
to the white wire from the power source.
---Attach the fixture ground wire to the
mounting strap unit (A) with the green
ground screw. Then connect it to the house
ground wire with a wire connector (C).
Carefully put the wires back into the outlet box.