Installation Sheet

210831
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THIS INSTRUCTION.
P0364
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
Turn off the power at fuse or circuit box.
Installation Steps
Mounting Strap Unit (A)
Lock Nut
Mounting Screw (B)
Wire Connector (C)
Fixture Mounting Screw
Green Ground Screw
Outlet Box
Hardware Package(included):
Mounting Strap Unit (A) Wire Connector (C)Mounting Screw (B)
Loop Lock (D)
Chain (E) Bolt Nut (F)
Canopy
Bolt Nut (F)
Loop Lock (D)
Fixture Loop
Loop Lock (D)
Loop
Chain (E)
Candelabra Base Bulb
Max.60W (not included)
Handmade Shell String
Fixture
1. Attach the mounting strap unit (A) to the outlet box
using two mounting screws (B).
2. Choose the length of the chain (E) you need,
use pliers (not included) to open and remove
excess chain section, then weave the fixture
wire and the fixture ground wire through the
chain (E) and canopy.
3. Connect one end of the chain (E) with the
loop by using a loop lock (D).
4. Connect the other end of the chain (E) with the
fixture loop by using another loop lock (D).
5. Thread the fixture wire and fixture ground wire
through mounting strap unit (A).
6. Pull out the outlet wires and house ground wire from the outlet box.
Make wire connections using the wire connectors (C):
---The smooth wire (marked) from the fixture to the black wire from the
power source.
---The ridged wire (unmarked) from the fixture to the white wire from the
power source.
---Attach the fixture ground wire to the mounting strap unit (A) with the green
ground screw, then connect it to the house ground wire with a wire
connector (C).
Carefully put the wires back into the outlet box.