Installation Sheet

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
T0611
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
WARNING: Turn off the main power at circuit breaker before installing fixture.
AVERTISSEMENT: Coupez la source d’alimentation principale au panneau
central de disjoncteurs avant d’installer le luminaire.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ
AND SAVE THESE INSTRUCTIONS.
210714
Hardware Package (included):
Mounting Screw (B) Wire Connector (C)Mounting Strap Unit (A)
Turn off the power at fuse or circuit box.
Installation Steps
Fig.1
Bottom Glass Panel
Bottom Clip
Bottom Notch
Top Clip
Side Glass Panel
1. Attach the mounting strap unit (A) to the outlet box by using two mounting screws (B).
2. Remove two set screws to separate the metal frame from the ceiling pan.
Ceiling Pan
Socket
Finial
Metal Frame
Max.60W Bulb
(not included)
Mounting Screw (B)
Green Grounding Screw
Wire Connector (C)
House Grounding Wire
Fixture Grounding Wire
Outlet Box
Fixture Wire
Threaded Pipe
Mounting Strap Unit (A)
Hex Nut
Washer
Set Screw

Summary of content (2 pages)