Specification Sheet

House Grounding Wire

Green Grounding Screw (E)

Fixture Grounding Wire

Wire Nut (C)

Back Plate

Metal Frame

Flathead Screw

Ball Nut (G)

Mounting Screw (B)

Mounting Plate (A)

Outlet Box

Fixture Wire

Lock Nut (F)

Fixture Mounting

Screw (D)

Bulb Type T10 Max. 60W

(not included)

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

W0252

Hardware Package (included):

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

Turn off the power at fuse or circuit box

161012

Green Grounding

Screw (E)

Fixture Mounting

screw (D)

Mounting Screw (B)

Wire Nut (C)

Installation Steps

Lock Nut (F)

Mounting plate (A)

Ball Nut (G)

PAGE 1
W0252 ASSEMBLY AND INSTALLATION INSTRUCTIONS WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE. NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS.
PAGE 2
1. Attach the metal frame onto the fixture light and tighten it with the flathead screws. 2. Thread two fixture mounting screws to the mounting plate, and secure them with two lock nuts. Note: Make sure that the fixture mounting screws are lined up horizontally, to ensure that the fixture will be level. 3. Pull out the source wires from the outlet box.