Installation Sheet

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

W0330

WARNING:

AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.

181126

Hardware Package (included):

Fixture Mounting screw (E)

Mounting Screw (B) Green Grounding Screw (C)

Wire Connector (D)

Lock Nut (F)

Ball Nut (G)

Mounting plate (A)

Outlet Box

House Grounding Wire

Mounting Plate (A)

Green Grounding Screw (C)

Fixture Grounding Wire

Glass Holder

Glass Shade

Bulb Type T Max.

60W (not included)

Fixture Mounting Screw (E)

Lock Nut (F)

Mounting Screw (B)

Back Plate

Wire Connector (D)

Fixture Wire

Ball Nut (G)

PAGE 1
W0330 ASSEMBLY AND INSTALLATION INSTRUCTIONS WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER WHILE INSTALLING OR SERVICING THIS FIXTURE. NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS.
PAGE 2
Installation Steps Turn off the power at fuse or circuit box. 1. Attach the mounting plate to the outlet box by using two mounting screws. Adjust fixture mounting screws-loosen the nut, adjust length as necessary, and tighten back down. 2. Pull out the source wires from the outlex box. Make wire connections using wire connectors as follows: ---Connect the hot wire (usually black insulation) from the fixture to the black wire from the power source.