Installation Sheet

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

W0395

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ

AND SAVE THESE INSTRUCTIONS.

Hardware Package (included):

Mounting Screw (B) Wire Connector (C)

Bolt Nut (D) Set Screw (E)

Mounting Plate Unit (A)

Wire Connector (C)

House Ground Wire

Backplate

Outlet Box

Mounting Screw (B)

Green Ground Screw

Fixture Mounting Screw

Mounting Plate Unit (A)

Fixture Wire

Bolt Nut (D)

Fixture Body

Set Screw (E)

Glass Holder

Fixture Ground Wire

Glass Shade

Max.40W Type B Bulb

(not included)

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.

210715

PAGE 1
ASSEMBLY AND INSTALLATION INSTRUCTIONS W0395 WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER WHILE INSTALLING OR SERVICING THIS FIXTURE. NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS. Hardware Package (included): Glass Shade Mounting Plate Unit (A) Mounting Screw (B) Bolt Nut (D) Wire Connector (C) Max.
PAGE 2
Installation Steps Turn off the power at fuse or circuit box. 1. Unscrew the two bolt nuts (D), remove the mounting plate unit (A) from the backplate. 2. Attach the mounting plate unit (A) to the outlet box by using two mounting screws (B). Adjust the length of the preinstalled fixture mounting screws if necessary. Note: Make sure that two fixture mounting screws are lined up horizontally to make the fixture level. 3. Pull out the source wires from the outlet box.