Installation Guide

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
C0077
Hardware Package (included):
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
Turn off the power at fuse or circuit box.
141204
Mounting Strap (A)
Green Grounding
Screw (C)
Fixture Mounting
Screw(E)
Ball Nut(G)
Mounting Screw (B)
Wire Nut (D)
Lock Nut (F)
Outlet Box
House Grounding Wire
Wire Nut (D)
Fixture Mounting Screw (E)
Fixture
Mounting Strap (A)
Green Grounding Screw (C)
Mounting Screw (B)
Lock nut (F)
Ball Nut (G)
1. Attach the mounting strap to the outlet box by using
two mounting screws.
2. Screw the threaded pipe into the coupling, then secure it
with a washer and hex nut.
NOTE:Depth of threaded pipe may need to be adjusted
to properly fit glass shade, decorative cup and finial.
3. Install bulbs (not included). See relamping label at socket
area or packaging for maximum allowed wattage.
4. Attach the glass shade to the fixture by inserting the threaded
pipe, then secure it with a rubber pad, metal pad and hex nut.
5. Slip the decorative cup up through the threaded pipe, secure
it with the finial.
6. Pull out the source wires from the outlet box, make wire
connections using wire nuts as follows:
---Connect the hot wire (usually black insulation) from
the fixture to the black wire from the power source.
---Connect the neutral wire (usually white insulation)
from the fixture to the white wire from the power
source.
---Attach the fixture grounding wire (usually green
insulation or bare wire) to the mounting strap with
the green grounding screw. Then connect it to the
house grounding wire with the wire nut.
Carefully put the wires back into the outlet box.
7. Attach the fixture to the mounting strap by inserting two
fixture mounting screws, then secure it with two ball nuts.
Turn on the power at fuse or circuit box.
Installation Steps
Glass Shade
Metal Pad(M)
Rubber Pad(O)
Hex Nut(K)
Decorative Cup(I)
Finial(H)
Bulb Type A Max.100W
(not included)
Hex Nut(K)
Threaded Pipe(J)
Washer(L)
Coupling
Washer (L)
Hex Nut (K)
Decorative Cup(I)
Finial(H)
Rubber Pad (O)
Metal Pad (M)
Threaded pipe (J)