Installation Guide

ManualsBrandsVaxcel ManualsShop All VaxcelVaxcel Lighting Toledo 2 Light 13" Wide Flush Mount Bowl Ceiling Fixture

Fig.1

Screw

Key Hole Slot

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

C0232

Outlet Box

House Ground Wire

Wire Connector (D)

Fixture Mounting Screw (C)

Ceiling Pan

Socket

Coupling

Tube (H)

Glass Shade

Metal Pad (I)

Threaded Pipe-1

(G)

Hex Nut (J)

Cover (F)

Finial (E)

Mounting Strap (A)

Green Ground Screw

Mounting Screw (B)

Hardware Package (included):

190724

Threaded Pipe-1 (G)

Tube (H)

Mounting Screw (B) Wire Connector (D)Mounting Strap (A) Fixture Mounting Screw (C)

Metal Pad (I) Hex Nut (J)

Cover (F)

Finial (E)

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

Turn off the power at fuse or circuit box

Installation Steps

Type A Max.60 W

or ST Vintage Bulb

(not included)

Threaded Pipe

1. Attach the two fixture mounting screws (C)

to the holes on the mounting strap (A) and

screw them in 2 to 3 turns.

2. Attach the mounting strap (A) to the outlet box

using two mounting screws (B).

Summary of content (2 pages)

PAGE 1
ASSEMBLY AND INSTALLATION INSTRUCTIONS C0232 WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE. NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS. Hardware Package (included): Mounting Strap (A) Mounting Screw (B) Fixture Mounting Screw (C) Wire Connector (D) Finial (E) Cover (F) Threaded Pipe-1 (G) Tube (H) Metal Pad (I) Hex Nut (J) Fig.
PAGE 2
3. Pull out the source wires from the outlet box. Make wire connections using wire connectors (D) as follows: ---Connect the hot wire (black insulation) from the fixture to the black wire from the power source. ---Connect the neutral wire (white insulation) from the fixture to the white wire from the power source. ---Attach the fixture grounding wire (green insulation or bare wire) to the mounting strap (A) with the green ground screw, then connect it to the house ground wire with the wire connector (D).