Installation Sheet

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

C0198

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

Mounting Screw (B)

Wire Connector (F)

Ball Nut (G)

Mounting Plate (A)

Green Grounding

Screw (C)

Fixture Mounting

Screw (D)

Hardware Package (included):

Lock Nut (E)

181109

Outlet Box

House Grounding Wire

Wire Connector (F)

Lock Nut (E)

Mounting Screw (B)

Green Grounding Screw (C)

Fixture Wire

Fixture Grounding Wire

Canopy

Ball Nut (G)

Fixture Mounting Screw (D)

Mounting Plate (A)

Metal Shade

Bulb Type A Max.100W

(Not included)

PAGE 1
C0198 ASSEMBLY AND INSTALLATION INSTRUCTIONS WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE. NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS.
PAGE 2
Installation Steps Turn off the power at fuse or circuit box 1. Thread two fixture grounding screws through the mounting plate, then secure them with two lock nuts. Adjust the length of the fixture grounding screws if necessary. Note: Make sure that fixture grounding screws are lined up horizontally, in order to ensure that the fixture will be level. 2. Attach the mounting plate to the outlet box by using two mounting screws. 3. Pull out the source wires from the outlet box.