Installation Sheet
INSTALLATION INSTRUCTIONS
IMPORTANT:
e BEFORE YOU BEGIN INSTALLING THE FAN, CAREFULLY READ ALL INFORMATION ON THE SEPARATE
SHEET "SAFETY INSTRUCTIONS" AS WELL AS THE FOLLOWING "INSTALLATION INSTRUCTIONS". IF
IN
DOUBT, CONSULT A QUALIFIED ELECTRICIAN.
e SAVE ALL INSTRUCTIONS.
NOTE: The fan weight is 16.8 lbs (7.6 kgs). Be sure the outlet box you are using is securely attached to the building
structure and can support the full weight
of
the fan. Failing to do so can result
in
serious injury.
Installation
Steps :
D
Turn OFF the electric circuit at the
main fuse
or
circuit breaker box.
Remove the Lock Pin and take
off
the Hanger Pin.
,--
~ockPin
Insert and tighten the two Collar
Screws. Slide Lock Pin into Hanger
Pin until it is locked into position.
Tighten the hanger bracket to the outlet
box with 2 mounting screws.
(To
reduce
the risk
of
fire, electric shock,
or
personal
injury, mount to the outlet box marked
"Acceptable for fan support" and use
mounting screws provided with the outlet
box.)
Note: For slope ceiling installation, make
sure
that
the chip
of
the hanger bracket
is toward the floor.
Thread the motor wires through the
canopy, decorative cap and downrod.
Loosen the collar screws
in
part way.
Insert the Downrod into the Collar.
Slide Hanger Pin through holes
of
Collar and Downrod.
PAGE:
5/8
Hang the fan
on
Hanger Bracket, and
make sure the slot
of
hanger ball is
snapped into the chip
of
Hanger
Bracket exactly.
Note: For slope ceiling installation,
make sure the
slot
of
hanger ball and
the chip
of
hanger bracket face down.
'!i~e.Ry4~~
180103