Installation Guide

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
H0145
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
Turn off the power at fuse or circuit box.
141210
Page 1
Mounting Strap (A)
Mounting Screw (B)
Green Grounding
Screw (C)
Hex Nut (D)
Wire Nut (E)
Canopy (G)
Top Loop (H)
Collar (I)
Hardware Package (included):
Assembly Instructions:
Threaded Pipe (F)
Washer (J)
1. Attach the threaded pipe to the mounting strap, then secure it
with a washer and hex nut.
2. Attach the mounting strap to the outlet box by using two mounting
screws.
3. Secure the top loop to the threaded pipe.
4. Attach the bobeche, rubber pad and metal pad to fixture in order, then secure
them with loop. (Don’t over tighten.) Thread fixture wires through bobeche,
rubber pad , metal pad and threaded end of loop first.
5. Connect the chain:
- Determine length of chain needed to achieve desired fixture height. (To remove excess
chain section, use pliers to bend link open.)
Loop
Metal Pad
Rubber Pad
Outlet Box
House Grounding Wire
Wire Nut (E)
Fixture Wire
Fixture Grounding Wire
Mounting Strap (A)
Green Grounding Screw (C)
Mounting Screw (B)
Threaded Pipe (F)
Canopy (G)
Top Loop (H)
Hex Nut (D)
Washer(J)
Collar (I)
Loop Lock (K)
Loop Lock (K)
Chain (L)
Bulb Type B Max.60W
(not included)
Loop Lock (K)
Chain (L)
Crystal drop(M)
12 SETS
Crystal drop(M)
Crystal drop(N)
1PC
Crystal drop(N)
Pearl Strand(O)
6 SETS
Bobeche(Q)
1PC
Pearl Strand(O)
Bobeche(Q)
Fixture
Candle Tube
Socket
Bottom Glass(P)
1PC
Finial
Bottom Glass(P)