Installation Guide

ManualsBrandsVaxcel ManualsShop All VaxcelVaxcel Lighting Mini Pendant 1 Light Mini Pendant

1. Rod Connections:

a. Thread the fixture wire from the main fixture through the

lower rod, secure the lower rod onto main fixture using

the threaded pipe.

b. Thread the fixture wire through the middle rod, and then

secure the middle rod onto the lower rod using the

threaded pipe.

c. Thread the fixture wire through the upper rod, and then

secure the upper rod onto the middle rod using the

threaded pipe.

The height can be adjustable to 18-3/4"~72-3/4", by

using the rods.

2. Thread the fixture wire through the coupling kit, collar, canopy,

then secure the rod assembly to the coupling kit.

3. Thread the fixture wire through the nipple and mounting strap.

Screw the nipple into the coupling kit.

4. Attach the nipple to the mounting strap, then secure it with a

washer and hex nut, adjust the height of the nipple you need .

Collar (H)

Canopy (I)

Outlet Box

House Grounding Wire

Wire Nut (E)

Nipple (C)

Mounting Strap (A)

Green Grounding Screw (F)

Mounting Screw (D)

Upper Rod

Middle Rod

Lower Rod

Threaded Pipe

Fixture Wire

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT

BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

P0077 / P0078

Glass Shade (N)

Bulb Type A or Edison Max.100W

(Not Included)

Coupling Kit (G)

Fixture Grounding Wire

Hex Nut (B) & Washer (J)

Threaded Pipe

Main Fixture

Socket

Parts:

Parts Number (4840MM For P0077)

Parts Number (4843MM For P0078)

Mounting Screw (D)

Hex Nut (B)

Wire Nut (E)

Mounting Strap (A)

12" Rod (K) (X4)

Parts Number (4842RR For P0077)

Parts Number (4845RR For P0078)

Nipple (C)

Green Grounding

Screw (F)

Coupling Kit (G)

Collar (H)

Canopy (I)

130828

Washer (J)

6" Rod (L) (X1)

Parts Number (4841RR For P0077)

Parts Number (4844RR For P0078)

3" Rod (M) (X1)

Parts Number (4840RR For P0077)

Parts Number (4843RR For P0078)

Glass Shade (N) (X1)

Parts Number (9489S For P0077)

Parts Number (9490S For P0078)

Summary of content (3 pages)

PAGE 1
ASSEMBLY AND INSTALLATION INSTRUCTIONS P0077 / P0078 WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE. NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS.
PAGE 2
5. Attach the mounting strap to outlet box by using two mounting screws. 6. Pull out the outlet wires and the house grounding wire from the outlet box. Make wire connections using the wire nuts: ---The black wire from fixture to the black wire from power source. ---The white wire from fixture to the white wire from power source. ---Attach the fixture grounding wire to the mounting strap with the green grounding screw. Then connect it to the house grounding wire with the wire nut.
PAGE 3
B A: 8" B: 18-3/4" ~ 72-3/4" A 130828