Installation Guide

P0113
Socket Ring
Glass Shade
Glass Holder
Fixture
Mounting Screw
Nipple(-a)
Mounting Strap
Green Grounding Screw
Hex Nut
Wire Nut
Washer
Outlet Box
Canopy
Loop
House Grounding Wire
Nipple(-b)
Chain
Fixture Grounding Wire
Collar
Top Loop
Loop Lock
Loop Lock
Fixture Wire
1. Attach the nipple(-a) to the mounting strap, then secure it with
a washer and a hex nut.
2. Attach the mounting strap to the outlet box by using two
mounting screws.
3. Secure the top loop to nipple(-a).
4. Screw the loop onto nipple(-b) securely using the plastic pad.
5. Choose the length of the chain you need, then weave the
fixture wire and the fixture grounding wire through the chain,
collar and canopy.
6. Connect one end of the chain with the loop by using a loop
lock.
7. Connect the other end of the chain with the top loop by using
another loop lock.
8. Thread the fixture wire and fixture grounding wire through the
top loop, nipple(-a) and mounting strap.
9. Pull out the outlet wires and house grounding wire from the
outlet box. Make wire connections using the wire nuts:
---The smooth wire (marked) from the fixture to the black wire
from the power source.
---The ridged wire (unmarked) from the fixture to the white wire
from the power source.
---Attach the fixture grounding wire to the mounting strap with
the green grounding screw. Then connect it to the house
grounding wire with a wire nut.
Carefully put the wires back into the outlet box.
10. Attach the canopy to the mounting strap by inserting the
top loop, then secure it with the collar.
11. Attach the glass shade to the glass holder, then secure it
with the socket ring.
12. Install a bulb (not included). See relamping label at socket
area or packaging for maximum allowed wattage.
13. Turn on the power at the main fuse or circuit breaker box.
Plastic Pad
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTE: 1.Before installing, consult local electrical codes for wiring and grounding requirements.
2.READ AND SAVE THESE INSTRUCTIONS.
WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT
BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.
Bulb Type A Max.100W
(not included)
Contents of Spare Parts:
Chain
(1 PC)
(X-CNDC-40)
Glass Shade
(1 PC)
(948255)
Assembly Kit
(1 SET)
(X-CNDC-40)
141114