Installation Guide
1. Rod Connections:
a. Thread the fixture wire from the fixture through the lower rod, then
secure the lower rod onto fixture using the threaded pipe.
b. Thread the fixture wire through the middle rod, and then secure the
middle rod onto the lower rod using the threaded pipe.
c. Thread the fixture wire through the upper rod, and then secure the
upper rod onto the middle rod using the threaded pipe.
Note: Length adjustable from 13-5/8'' to 55-5/8''. Use fewer rods
if shorter length is desired.
2. Thread the fixture wire through the canopy kit, then secure the rod
assembly to the set
threaded pipe
of the canopy kit.
3. Thread two fixture mounting screws (B) through the mounting strap (A),
and then secure with two lock nuts (E). Adjust the length of the fixture
mounting screws (B) if necessary .
4. Attach the mounting strap (A) to outlet box by using two mounting screws (B).
5.
Pull out the source wires from the outlet box. Make wire connections
using wire connectors
(C)
as follows:
---Connect the smooth-coated wire (marked) from the fixture to the
black wire from the power source.
---Connect the ribbed-coated wire (unmarked) from the fixture to the
white wire from the power source.
---Attach the fixture ground wire to the mounting strap
(C)
with the green
ground screw. Then connect it to the house ground wire with wire
connector
(C)
.
6. Attach the canopy kit to the mounting strap
(A)
by inserting the fixture
mounting screws
(D)
, then secure it with two ball nuts
(F)
.
7. Attach the glass shade to fixture, then secure it with three support rods.
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THIS INSTRUCTION.
P0300
190418
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
Hardware Package (included):
Turn off the power at fuse or circuit box.
Installation Steps
Upper Rod
Threaded Pipe
Upper Rod
Threaded Pipe
Upper Rod
Threaded Pipe
Middle Rod
Threaded Pipe
Lower Rod
Threaded Pipe
Fixture Wire
Fixture Mounting Screw (D)
Outlet Box
House Ground Wire
Wire Connector (C)
Fixture
Glass Shade
Support Rod
Bulb Type A Max.100W
(Not Included)
Set Threaded Pipe
Lock Nut (E)
Mounting Strap (A)
Green Ground Screw
Mounting Screw (C)
Fixture Ground Wire
Canopy Kit
Ball Nut (F)
Mounting Strap (A)
Fixture Mounting Screw (D)
Wire
Connector
(C)
Lock Nut (E)
Ball Nut (F)
Mounting Screw (B)
Support Rod (G)