Installation Guide

141028

screw. Then connect it to the house grounding wire with the wire nut.

Carefully put the wires back into the outlet box.

5. Attach the back plate to the cross bar by inserting the headless screws, then secure it with rubber pads and two ball nuts.

CAUTION: With silicone caulking compound, caulk completely around where the back plate meets with the wall

surface to prevent water from seeping into the outlet box.

6. Install bulb (not included). See relamping label at socket area or packaging for maximum allowed wattage.

Turn on the power at the main fuse or circuit breaker box.

The following parts are available for re-order if damaged or missing.

Spare Parts List:

Assembly Kit 5187MM (1 SET)

Assembly Kit 5188AA (1 SET)

Cross Bar(A)

Green Grounding

Screw (C)

Ball Nut(G)

Mounting Screw (B)

Set Screw

Curved Arm

Wire Nut (D)

Lock Nut (F)

Lock Nut

Headless Screw(E)

Rubber Pad (H)

Washer

Seeded Glass

9651S (1SET)

A: 6"

B: 13

C: 5"