Installation Sheet

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

T0463

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.

Hardware Package (included):

181126

Green Grounding

Screw (C)

Headless screw (D)

Mounting Screw (B)

Wire Connector (F)

Lock Nut (E)

Ball Nut (G)

Cross Bar (A)

Rubber Pad (H)

Back Plate

Fixture

Set Screw

Finial

Curved Arm

Nipple

Cross Bar (A)

House Grounding Wire

Green Grounding Screw (C)

Fixture Grounding Wire

Wire Connector (F)

Outlet Box

Fixture Wire

Mounting Screws (B)

Headless Screws (D)

Lock Nut (E)

Lock Nut

Ball Nut (G)

Rubber Pad (H)

Bulb Type A Max.60W

(not included)

PAGE 1
T0463 ASSEMBLY AND INSTALLATION INSTRUCTIONS WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER WHILE INSTALLING OR SERVICING THIS FIXTURE. NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS.
PAGE 2
Installation Steps Turn off the power at fuse or circuit box. 1. Thread two headless screws (D) through the cross bar (A), then secure them with four lock nuts (E) (two on each side of the cross bar). Adjust the length of the headless screws (D) if necessary. 2. Attach the cross bar (A) to the outlet box by using two mounting screws (B). 3. Slip the fixture and one end of the curved arm through the nipple and secure them with the finial.