Installation Sheet

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
T0466 T0467
Hardware Package (included):
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
181029
Green Grounding Screw (E)
Headless screw (D)
Mounting Screw (B)
Wire Connector (C)
Lock Nut (F)
Mounting plate (A)
Ball Nut (G)
1. Thread two headless screws (D) through the mounting
plate (A), then secure them with four lock nuts (F) (two
on each side of the mounting plate). Adjust the length
of the headless screws (D) if necessary.
Note: Make sure that the headless screws (D) are lined up
horizontally, to ensure that the fixture will be level.
2. Attach the mounting plate (A) to the outlet box by using two
mounting screws (B).
3. Take a glass panel and gentle slide it into the glass frame
in place, secure it by pressing two clips on top side of the
glass frame and two clips on the bottom of the glass frame.
Repeat with the other glass panels. (See Fig.1)
Turn off the power at fuse or circuit box
Rubber Pad (H)
House Grounding Wire
Fixture Grounding Wire
Wire Connector (C)
Mounting Plate (A)
Outlet Box
Fixture Wire
Lock Nut (F)
Back Plate
Photocell
Fixture
Rubber Pad (H)
Ball Nut (G)
Headless Screw (D)
Mounting Screw (B)
Green Grounding Screw (E)
Bulb Type A Max.60W
(not included)
IMPORTANT:
The sensor has an excellent photocell function
to enable the light to turn on at dusk and off at
dawn automatically.
Glass Panel
Glass Frame
Clip
Fig.1