Installation Guide

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

190612

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

T0517 T0518 T0519 T0522 T0523 T0524

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.

Turn off the power at fuse or circuit box

Installation Steps

Hardware Package (included):

Green Grounding Screw (E)

Headless screw (D)

Mounting Screw (B)

Lock Nut (F)

Mounting plate (A)

Rubber Pad (H)

Ball Nut (G)

Wire Connector (C)

1. Thread two headless screws (D) through the mounting plate (A), and then secure them with four lock nuts (F)

(two on each side of the mounting plate (A).) Adjust the length of the headless screws (D) if necessary.

Note: Make sure the headless screws are lined up horizontally to make the fixture will be level.

2. Attach the mounting plate (A) to the outlet box by using two mounting screws (B).

House Grounding Wire

Wire Connector (C)

Fixture Grounding Wire

Mounting Plate (A)

Outlet Box

Fixture Wire

Lock Nut (F)

Headless Screw (D)

Mounting Screw (B)

Green Grounding Screw (E)

Back Plate

Rubber Pad (H)

Ball Nut (G)

Bulb Type A MAX 60W

(not included)

PAGE 1
ASSEMBLY AND INSTALLATION INSTRUCTIONS T0517 T0518 T0519 T0522 T0523 T0524 WARNING: TO TO SHUT SHUT OFF OFF TOAVOID AVOID RISK RISK OF OF ELECTRICAL ELECTRICAL SHOCK, BE SURE TO POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE. POWER WHILE INSTALLING OR SERVICING THIS FIXTURE. NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS.
PAGE 2
3. Pull out the source wires and the house grounding wire from the outlet box. Make wire connections using the wire connectors (C): ---Connect the black wire from the fixture to the black wire from the power source. ---Connect the white wire from the fixture to the white wire from the power source. ---Attach the fixture grounding wire to the mounting plate (A) with the green grounding screw (E). Then connect it to the house grounding wire with a wire connector (C).