Instructions / Assembly

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

T0661

WARNING: Turn off the main power at circuit breaker before installing fixture.

AVERTISSEMENT: Coupez la source d’alimentation principale au panneau

central de disjoncteurs avant d’installer le luminaire.

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ

AND SAVE THESE INSTRUCTIONS.

Hardware Package (included):

Set screw (D)

Mounting Screw (B)

Wire Connector (C)

Mounting Plate Unit (A)

Page 1 / 2

House Ground Wire

Green Ground Screw

Wire Connector (C)

Backplate

Mounting Screw (B)

Mounting Plate Unit(A)

Outlet Box

Fixture Wire

Set Screw (D)

Fixture

Max. 40W Type A Bulb

(not included)

Max. 40W Type A Bulb

(not included)

Cover

221024

PAGE 1
ASSEMBLY AND INSTALLATION INSTRUCTIONS T0661 W WARNING: Turn off the main power at circuit breaker before installing fixture. AVERTISSEMENT: Coupez la source d’alimentation principale au panneau central de disjoncteurs avant d’installer le luminaire. NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS. Hardware Package (included): Mounting Plate Unit (A) Mounting Screw (B) Wire Connector (C) Max.
PAGE 2
Installation Steps Turn off the power at fuse or circuit box 1. Unscrew the two set screws (D) and remove the mounting plate unit (A) from the backplate. 2. Attach the mounting plate unit (A) to the outlet box by using two mounting screws (B). Note: Make sure that two set holes are lined up horizontally to make the fixture level. 3. Pull out the source wires from the outlet box.