Installation Guide

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
W0356
Hardware Package (included):
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
Mounting Screw (B) Wire Connector (E) Finial (D)Mounting Strap Unit (A)
Turn off the power at fuse or circuit box
Installation Steps
191211
Mounting Screw (B)
Wire Connector (C)
Fixture Wire
Mounting Strap Unit (A)
Hex Nut
Washer
Fixture Ground Wire
Green Ground Screw
Outlet Box
House Ground Wire
Threaded pipe
Candelabra Bulb Max.60W
(not included)
Socket
Crystal
Fixture
1. Attach the mounting strap unit (A) to the outlet box by using two mounting screws (B).
2. Pull out the source wires from the outlet box. Make wire connections using wire connectors (C)
as follows:
---Connect the hot wire (black insulation) from the power source to the black wire from the fixture.
---Connect the neutral wire (white insulation) from the power source to the white wire from the fixture.
---Attach the fixture ground wire (green insulation or bare wire) to the mounting strap unit (A)
with the green ground screw, or connect to the source ground wire if available.
Carefully put the wires back into the outlet box.