Installation Guide

ManualsBrandsVAXCEL ManualsCeiling Light Parts34 in. Bronze Canopy Kit Hang Up to 3 Mini Pendant Lights

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.

NOTE: Before installing, consult local electrical codes for wiring and grounding requirements.

NOTE: We have the bar( sold separately ) , to add your single pendant to three-piece pendant

at your option.

Installation Steps

For Single Pendant:

1. Insert two screws to the mounting strap.

2. Attach the mounting strap to ceiling box by using two

mounting screws.

3. Rod connection:

a.Thread the fixture wire from the glass holder through

the dow rod (w/o nipple), and then attach the down rod

to the glass holder by using the nipple.

b.Thread the fixture wire from the down rod through the

middle rod (w/ nipple) and then secure the middle rod

with the nipple.

c.Thread the fixture wire through the upper rod( w/ nipple),

and then secure the upper rod with the nipple.

*The height of light fixture can be adjustableyourself by using

upper / middle rod or not at your option.

4. Thread the fixture wire through the set nipple and the canopy,

and then secure the upper rod to the canopy with the set

nipple.

5. Make wire connections with wire nuts:

---The black wire from fixture to the black wire from power source.

---The white wire from fixture to the white wire from power source.

---Attach the fixture grounding wire to the mounting strap with the

green grounding screw.Then connect it to the house grounding

wire with the wire nut.

Carefully tuck wires back into the ceiling box.

6. Attach the canopy to the mounting strap by inserting the screws,

and then secure with the two bolt nuts.

7. Attach the glass shade to the glass holder, and then secure with

the socket ring.

8. Install a bulb.(Please do not exceed the maximum

capacity, that is recommended on the socket)

9. Turn power on at fuse or circuit box.

Ceiling Box

House Grounding Wire

Wire Nut

Screw

Mounting Strap

Green Grounding Screw

Fixture Grounding Wire

Mounting Screw

Canopy

Bolt Nut

Set Nipple

Upper Rod

Middle Rod

Down Rod

Fixture Wire

Glass Holder

Glass Shade

Socket Ring

Nipple

Page 1 of 2 ( For Single Pendant )

050718

Summary of content (2 pages)

PAGE 1
ASSEMBLY AND INSTALLATION INSTRUCTIONS AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF WARNING: TOPOWER WHILE INSTALLING OR SERVICING THIS FIXTURE. NOTE: Before installing, consult local electrical codes for wiring and grounding requirements. NOTE: We have the bar( sold separately ) , to add your single pendant to three-piece pendant at your option. Installation Steps For Single Pendant: 1. Insert two screws to the mounting strap. 2.
PAGE 2
For Three-piece Pendant: 1. Dismantle the single pendant of its canopy one by one.Unscrew the hex nut by the wrench, then remove the hex nut, washer , grounding tab, metal pad and set nipple from the canopy. (See Fig.1) 2. Unscrew the set screws from bar. 3. Insert the fixed side of the set nipples to the middle hole of the bar. Then secure with metal pad, grounding tab, washer, hex nut which from the single pendant.(See Fig.2) 4. Repeat Step3 to insert the rest two pendants to the side hole of the bar. 5.