Users Manual

ManualsBrandsVaxis ManualsVideo EquipmentWireless video system

VAXIS.ATOM 500 SDI

Wireless Video System

Instructions

Dear users:

Thank you very much for choosing ATOM 500

wireless video transmission equipment. This product

adopts h.265 image coding and decoding technology

and 5g wireless transmission technology. Realize low

delay and high quality video transmission. We

sincerely hope that you can enjoy the long-term

convenience of using the product and wish you the

best experience from the product.

All the information contained in this manual

has been strictly verified to be correct at the time of

publication. However, due to the continuous

upgrading and improvement of the product, we hope

that your equipment and use may be different from

the description in this manual. For this, we hope you

will take the actual product as the standard, and

welcome you to call our service phone for

Summary of content (11 pages)

PAGE 1
VAXIS.ATOM 500 SDI Wireless Video System Instructions Dear users: Thank you very much for choosing ATOM 500 wireless video transmission equipment. This product adopts h.265 image coding and decoding technology and 5g wireless transmission technology. Realize low delay and high quality video transmission. We sincerely hope that you can enjoy the long-term convenience of using the product and wish you the best experience from the product.
PAGE 2
consultation.
PAGE 3
Packing list Transmitter *1 Receiver *1 user's manual*1 Expanding accessories *1 Cold boot platform*1 Type-C power cord*1 Hexagon wrench*1 Introduction  Thank you for choosing our long-range wireless HDMI products. Before you install the product, please read the user manual carefully and follow the manual of the user manual to avoid product damaged or other safety accidents.  Due to product version upgrade or other reasons, the contents of this manual will be updated from time to time.
PAGE 4
■Name of the product parts Transmitter: ① Power switch ② Screen display ③ HDMI Output ④ HDMI Input ⑤ Type-C DC Input ⑥ Direction button1 ⑦ Direction button2 ⑧ Menu button ⑨ Installation of extension accessories 4
PAGE 5
Receiver: ① Power switch ② Screen display ③ HDMI Output ④ HDMI Output ⑤ Type-C DC Input ⑥ Direction button1 ⑦ Direction button2 ⑧ Menu button ⑨ Installation of extension accessories 5
PAGE 6
■Parameters: Transmitter Receiver HDMI/ input(Type A Female), /SDI input, Type-C interface HDMI Output 1(Type A Female), SDI Output, Type-C interface Voltage 5V DC 5V DC Power consumption <6.5W <4.5W Size (LxWxH):105x64x28mm (LxWxH):105x64x28mm Mass 134g 130g Input Video Format HDMI/SDI 720p59.94/60, 1080i 50/59.94/60, 1080p23.98/24/25/29.9/30/50/59 .94/60; / Output Format / HDMI/SDI 720p59.94/60, 1080i 50/59.94/60, 1080p23.98/24/25/29.9/30/50/59.
PAGE 7
Operation guide 1. Frequency switching Press the transmitter "direction key" to switch the frequency point, press the menu key to confirm the frequency point, and the receiver will automatically switch the connected frequency point synchronously. No frequency point switching function of receiver. 2. App password modification method Press "menu" key for menu interface, switch to "PWD < current >", click "menu" to confirm, switch to "new", click "menu" to confirm, wait for about 10s.
PAGE 8
transmitter, and switch to app < on > L, which is on by default. Click to switch to < off > to close the app connection 5. App installation and use ① App name is "vaxis vision" ，Download in app storeg ② Usage method a． Open app "vaxis vision" to select the connection device b． Long press TX menu key for 3S, switch to SSID, and input WiFi name (VX a00001) to app c． The TX menu is switched to PWD, and the 8-digit number displayed is WiFi password. Input it to app and click Connect. 6.
PAGE 9
Common troubleshooting 1. Connection exception a. Please check whether TX / RX power supply is normal b. When RX is always displayed as link, please restart TXRX / switch to a clean frequency point 2. Display abnormal problems a. Please check whether the video source is connected to HDMI in correctly b. Please check whether the signal format can be normally displayed on the OLED screen 3. Video picture jam a. Please check whether the signal quality displayed by the receiver is good.
PAGE 10
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
PAGE 11