Ports Qep—o fvif—o u ©e3e® Jie shortcut @ Power Button © HDMI Output © HDMI Input © 3.
User Interface Main Menu Setting Lock Monitor Features Loading LUT LUT Video Format Record Replay Battery Wireless Channel od File Name Wireless Signal Strength Wireless Mode Secondary Menu Setting Input Source Set Options
Common Buttons Waveform Monitor Assist Focus Assist Color Management Input Source Main Menu Setting Function Click the blank space to return to the main interface
Transmitter & Receiver Switching Select the Signal Menu — Wireless Mode interface, switch TX or RX mode according to your needs, and the current status will be displayed in the status bar at the bottom. Record & Replay FTF card needs to be inserted for recording Click Record in the bottom right corner to record the current screen.
Record & Replay Progress Bar Return All Replay Files Duration PreviousPlay/PauseNext File Name LUT Loading LUT Shortcut LUT Name Inside LUT LUT Switch Put the LUT file into the TF card (LUT format is *.
LUT Loading *Max Supported Capacity: 256GB Select the LUT in the TF card and click import, it will be prompted that the current LUT shortcut key can be overwritten during import. If the LUT shortcut key is not currently selected, it will be loaded into the monitor {the monitor can save up to 50 Slut. pale You can only delete the LUT in the monitor, the LUT on the shortcut key cannot be deleted. You need to restore the factory setting, or select a new LUT to overwrite.
APP Download Search Axis Vision on App Store or Google Play to download the IOS, Android, pa Dos application. Search: Avails Vision LA NT SG Download he €lelolelltieli)V] al 1B 61 Tgllo7: To] 1.Then open the mobile App to Connect Device, select Scan Code to connect 2.Click Wireless Information in the Signal Menu of AS 3.8can the QR code to connect APP Monitoring Enter the Settings — System Information interface, select Wireless Information.
Pairing Enter the Signal Menu — Wireless Information interface, click the pairing button both simultaneously to pair. The pairing method is the same mode. If it shows unpaired after scanning the QR code, it means that the current A5 has never been paired after reset. If it shows paired, it proves that a device has been paired with it. Firmware Upgrade Put the upgrade folder into the top directory of the TF card(format FAT-32).
Naming This device is a non—handheld device, and the distance between the device and people is greater than 20cm during work, FCC 15.105 FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2.
FCC 15.105 FCC STATEMENT FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
Specification Interface DC IN, HDMI IN, HDMI OUT, 3.5mm Audio Jack, Type-C Input Voltage NPF970/DC12V Screen Size 5.