Installation and Operation Guide
VITO Evaluation Kit Installation and Operation Guide
Vayyar Confidential
Page 4 of 12
1. Introduction
This guide provides brief information on the installation and operation of the Vayyar VITO Evaluation
Kit. The sensor is a three-dimensional vehicular-radar system operating at 77-81GHz, which can be
installed and mounted outside or inside a vehicle, and detect objects in a defined arena and display a
real-time image of their positions within the arena.
VITO is described as model VCTA1_42LS under FCC-ID: 2AHIS-V80G.
2. Release Information Note
This document describes in short operation options for the evaluation-kit of Vayyar 3D vehicular-
radar. For more detailed data-sheets and user manual – please contact Vayyar.
Note that both algorithmic capabilities and features are under continuous development and
improvement.
3. Glossary
Term
Definition
API
Application Programming Interface
DC
Direct Current
DLL
Dynamic Link Library
EVK
Evaluation Kit
GUI
Graphical User Interface
IP
Internet Protocol. An IP address is a numerical identifier assigned to a computing device or
node in a TCP/IP network. The address is used to locate and identify the node in
communications with other nodes on the network.
MCU
Micro-Controller Unit
PCB
Printed Circuit Board
RF
Radio Frequency
RADAR
Radio Detection and Ranging
SoC
System-on-chip