User's Manual

ManualsBrandsVayyar Imaging ManualsElectronicsUWB Module

Confidential Document |

Page

VMAKERPROUWB – User manual

CONFIDENTIAL AND PROPRIETARY DATA

reserved.

This document is the property of Vayyar and all materials and information contained herein are the confidential and

proprietary information of Vayyar and are protected by international copyright laws. The copyrights are owned by Vayyar

or the ori

ginal creator of the material. The materials and information contained herein are provided to you for internal

information purposes only, and no portion of the materials and information herein may be copied, reproduced,

distributed, transmitted, displayed,

published, broadcasted or used in any way whatsoever directly or indirectly without

the prior written consent of Vayyar or in any case of third party materials, without that third party's consent. This

document shall be returned to Vayyar promptly upon re

quest.

The materials and information contained herein are provided "AS IS" and Vayyar does not provide any warranties of any

kind, whether express or implied, including but not limited to implied warranties of merchantability, fitness for a

particular purp

ose, and non

infringement.

Covers models: VMPRO19CB4, VMPRO19EB4

Revision 2.1

Nov 2022

Summary of content (10 pages)

PAGE 1
VMAKERPROUWB – User manual Covers models: VMPRO19CB4, VMPRO19EB4 Revision 2.1 Nov 2022 CONFIDENTIAL AND PROPRIETARY DATA Copyright 2020 Vayyar Imaging Ltd. All rights reserved. This document is the property of Vayyar and all materials and information contained herein are the confidential and proprietary information of Vayyar and are protected by international copyright laws. The copyrights are owned by Vayyar or the original creator of the material.
PAGE 2
TABLE OF CONTENTS 1 Introduction ................................................................................................................... 3 2 Features ......................................................................................................................... 3 2.1 VMAKERPROUWB model ................................................................................................. 3 2.2 Regulatory domains ............................................................................
PAGE 3
1 Introduction The VMAKERPROUWB module builds upon and expands the technology of vMaker line of products (FCC ID: 2AHIS-VMAKER), to utilize a broader set of antenna models, support an optional enhanced signaling technique. The VMKAERPROUWB UWB module is used characterize the environment in the vicinity of the sensor by collecting and analyzing propagation information between the antennas, which is affected by the environment.
PAGE 4
Figure 1: VMAKERPROUWB module utilizing USB interface for communication with hosting device 2.2 Regulatory domains VMAKERPROUWB models have been manufactured in accordance with the regulatory domains in which they are to be operated. Currently, single model is designed to support FCC (for operation in the US), ISED (for operation in the Canada), and CE (for operation in EU and other countries using CE certification). If in doubt, consult your local experts before ordering.
PAGE 5
3 Technology The VMAKERPROUWB product are multi-antenna sensors that characterize the environment in the vicinity of the sensor. It is done by collecting and analyzing propagation information between the antennas, which is affected by the environment. The propagation response information is collected by VMAKERPROUWB and processed at the hosting device to obtain spatial information about the environment. WIFI/BT USB Host device Data acquisition RFIC VMAKERPROUWB VHOME Environment to be sensed 3.
PAGE 6
4 Interfaces The module main interface is USB for communication configuration. 4.1 USB Interface and Powering Options The board’s main interfaces are USB in high-speed mode and power supply. Both can be provided by an onboard USB type-C connector. Connector and powering options: Capability \ Model Connector types Power Supply Connector Voltage supply Power Consumption VMPRO19CB4, VMPRO19EB4 USB type-C USB type-C 5V +/-10% 0.4-0.
PAGE 7
Regulatory Information 7.1 Regulatory Conformance The VMAKERPROUWB device has been designed to be in compliance with the FCC regulations governing UWB hand-held systems (Part 15.519) also known as “battery powered devices” or “mobile devices.” This means that the device can be incorporated in a wide variety of products including educational robots, pipe locators, breathing monitors, etc. Note that there are other applications which are specifically forbidden, such as use of the devices in toys.
PAGE 8
7.2.2 FCC Part 15 Clause 15.21 “Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment” 7.2.3 FCC Part 15.19(a) [interference compliance statement] “This device complies with part 15 of the FCC Rules.
PAGE 9
7.3 Labels In general the module will be operated by hosting device that will show the FCC ID and IC in the app. If for some reason e-label will not be used, the module will have a printed sticker or a silk screen printed FCC ID label on it, and the manual shall advise the users to affix a label saying “Contains FCC ID: 2AHIS-VMAKERPROUWB” if the VMAKERPROUWB is installed so that the on-board label is not visible. 7.3.
PAGE 10
For location, see section 7.3.1. 7.4 Instructions for the Integrator The OEM integrator is responsible for ensuring that the end-user has no manual instruction to remove or install module. OEM Integrators Notices This device is intended only for OEM integrators under the following conditions: The transmitter module may not be co-located with any other transmitter or antenna. As long as this condition above is met, further transmitter test will not be required.