User Guide

The yellow indicator light show that electric heating tube is working and begin to
warming water tank.When the water temperature rises to the required temperature,
the temperature controller can automatically switch on the power, such a repeated
cycle,to ensure the constant temperature in the temperature range.
Cleaning section
1. After use, please counterclockwise thermostat to initial position, turn off the
power supply.
2. The water temperature should be reduced to room temperature, remove pasta
baskets and clean directly.
Common Failure & Solutions
Failure Phenomena
Reason
Solution Method
1. Control the power
switch,the indicator light is
not bright.
1. The power switch fuse
was blown.
1. Replace with new fuse.
2. Red and Green indicator
light is light at the same
time, the water
temperature does not rise.
1. The electric heating
pipe is loose.
2.The electric heating
tube is burnt out.
1. Tighten the electric
heating pipe wiring bolts.
2. Replace the heating tube.
3. Yellow indicator light is
light, the water
temperature rise can not
be controlled.
1. Thermostat doen’t
work.
1.Replace the thermostat.
4. The indicator light is not
bright, the water
temperature control is
normal use.
1. The indicator light
was burned.
1. Change the indicator light