User Manual

.Use and Maintainance
1 Connect the power supply.Rotate "Reversal Button" to CW direction.Then put
the sugar cane into feed port. Last, press "Power Switch" to press juice
automatically.(Note: "Reversal Button" rotate to CCW direction is only used to
remove jamed sugar cane.)
2 Clean the machine after using.
3 The machine should be placed smoothly.
4 Add lubricating oil (edible oil) on transmission gears every month.
5 Replace lubricating oil on gear box every three months.
. Error and Solution
Error
Solution
The sugar cane is
stuck when work
Please switch off power quickly,Press the CCW reverse
button to let the stucked sugar cane withdraw.
The inside of the
machine is blocked
Cut off the power, pull the plug out ,open the transparent
blind on the right,then clean the sugar cane dregs out .
The motor stop
suddenly when
extracting.
1 the external power cord is loosen off;
2 the motor will be too heat when the currency overloads,
protection switch is automatically disconnectedyou can
reuse when the temperature of motor cooled to 80;
3 Security switch damaged: replace the security switch;
4 The internal circuits terminals is loosen or circuits
damaged: fixed terminals, replacement the line.
. Structure
. Circuit Diagram
1 Rack
2 Motor
3 Chains
4 Rear Wall Panels
5 Rear Press Strips
6 Gears
7 Front Press Strips
8 Front Wall Panels
9 Pressrods
10 Baffles
11 Large Screws
12 Strainers
13 REVERSAL Button
14 Power Switch
15 Feed Port
16 Juice Pressing Room
17 Slag Outlet
18 Door
19 Juice Outlet
20 Machine Case
G4