User manual

17
2.1 TV Type: Select TV type.
2.2 TV Aspect: Select display configuration for disc.
16:9 Wide: Content presented in 16:9 geometry for widescreen TVs.
16:9 Pillar box: Content presented in 4:3 geometry or cropped content for widescreen TVs.
4:3 Letter box: Content presented in 4:3 geometry with horizontal black bars on top and
bottom for conventional TVs.
4:3 Pan and scan: Content cropped to fit within 4:3 geometry for conventional Tvs.
Note: 4:3Letter box and 4:3Pan and scan only take effect under SD resolution (480i/P or
576i/P)
2.3 Resolution: Select desired resolution.
2.4 Color Space
User can select the best color space the TV supported for best color effect
xvYCC: player implements a fallback algorithm in which the flow is xvYCC->YCC->RGB
base on EDID information via HDMI
YCC: player implements a fallback algorithm in which the flow is YCC->RGB base on EDID
information via HDMI
RGB: player will output video using RGB color space
Note: Color space setting only affects HDMI video output. Choose correct option here if you
know the color space feature of TV, choose xvYCC option to let player decide for you. For
some special case, e.g. the TV has wrong EDID information, please change color space to
RGB.
2.5 BD-ROM 1080/24p Output
On: player will output disk content recorded at 24 frames per second directly
Off: player will convert 24frams/sec content to 1080p 60Hz output
Note: This item is only affect HDMI output, if no HDMI connect to player or TV does not
support 1080p24Hz, it will act as off.
System Setup
Advanced Features
3. Audio Setting
ENTER
Setup ---Audio Setting
Digital Output
PCM Downsampling
Audio DRC
PCM
Off
Off