User`s guide

ManualsBrandsVDO Cyclecomputing ManualsBicycle AccessoriesC05

Using the Remote Control and Remote Operating Range

The remote control is used in the following way.

Procedure

Set the R/C switch on the remote

control to the ON position.

Point the remote control

transmitter toward one of the

remote control receivers on the

projector and operate the remote

control buttons.

Tip :

• Do not allow sunlight or light from fluorescent lamps to shine directly onto the

projector's remote control receivers, otherwise it may interfere with the reception of

signals from the remote control.

• Set the R/C switch on the remote control to the OFF position when not using the remote

control. Leaving the R/C switch on will consume battery power.

Use the remote control within the ranges indicated below. If the distance or

angle between the remote control and the remote control receiver is outside the

normal operating range, the remote control may not work.

Using the Remote Control

Remote Operating Range

Operating distance Operating angle

Approx. 10 m (30 ft.)

Approx. ±30° horizontally

Approx. ±15° vertically

Power

A/V Mute

Freeze

E-Zoom

Comp1

Source

Video

Auto

Preset

Volume

P in P

S-Video

Resize

Comp2/YCbCr

Help

Remote control

receiver (front)