User`s guide

Playing Sound from the Computer

The projector has a single built-in speaker with a maximum output of 5W. You

can use this built-in speaker to output the audio signals from a computer by

using any one of the following three connection methods, depending on the

shape of the computer's audio output port and the type of cable you have.

• By using the accessory A/V cable (white/red) to connect the computer's audio

output ports to the Audio 2 port (RCA jack) at the rear of the projector

• By using a commercially-available audio cable to connect the computer's

audio output ports to the Audio 1 port (stereo mini jack) at the rear of the

projector. It is recommended that you use an audio cable with a 3.5 mm

diameter stereo mini jack.

• For a computer which is capable of USB

audio output, by using the

accessory USB cable to connect the computer's USB port to the USB port at

the rear of the projector.

A/V cable (white/red)

(accessory)

To audio output port

To Audio 2 port

(White/Red)

Audio cable

(commercially-available)

To audio output port To Audio 1 port

USB cable

(accessory)

To USB port

Connecting to a Computer