User`s guide

Take out the lamp.

Hold the lamp by the two recesses on the

side to lift it up and out from the projector.

Install the new lamp.

Hold the lamp so that it faces the correct

way to fit into the projector, and then

insert the lamp until it clicks into place

and tighten the two fixing screws.

Install the lamp cover.

Insert the two cover tabs into the projector,

and then press the other side of the lamp

cover until it clicks into place.

Tip :

• Install the lamp securely. If the lamp cover is removed, the lamp turns off automatically

as a safety precaution. Moreover, the lamp will not turn on if the lamp or the lamp

cover is not installed correctly.

• Replacement lamps are provided with a spare air filter. The air filter should also be

replaced when the lamp is replaced.

• Dispose of used lamps properly in accordance with your local regulations.