Specifications

C2-6104A OPERATION MANUAL
16
source’s input – hence it should be turned Off it the CV/YC outputs are going to be
used.
This menu item is only available when the Output resolution is set to PAL or NTSC.
With this you can change the output type to the PAL or NTSC standard with the
further option of changing the output to the additional PAL & NSTC standards such
as PAL-M or PAL-N. SECAM is also available as an output on some units,
provided the ‘Output res’ is set to PAL / 50Hz.
This menu item is only available on certain units when the Output resolution is set
to PAL or NTSC. With this you can change the output filtering system to increase or
decrease the image sharpness. In general, high sharpness can result in increased
colour disturbance.
Sets the value of the fixed background color, which is present when PIP is used
with no Lock source background displayed. This menu item is only available for
units with overlay, keying and fading abilities.
For certain units with HDMI and/or SDI-compatible inputs and outputs, the audio
can be de-embedded from the video signal and sent to a compatible output.
‘On’ enables this to happen, and allows the audio source to be selected. ‘WinA’
sets the audio source to follow that of the main window’s video source.
8.3 Items Associated with the Adjust windows group
This menu group allows adjustment to be made to window specific parameters such
as the window source, its position, size and zoom level.
Window size adjustment can be performed in a number of different ways according
to whether ‘Aspect adjust’ is set to Simple, Advanced or Pixel. The main part of this
text assumes Simple mode – see later for a detailed description of the other modes.
Adjust windows
Window to adjust [A]
Adjust outputs
Audio emb. [On] [DVI-U1]
Adjust outputs
Luma/chr BW [Med] / [Med]
Adjust outputs
Stand. [NTSC-M/PAL-BDGHI]
Adjust outputs
Back Y/U/V [ 16] [128] [128]