Specifications

C2-6104A OPERATION MANUAL

1 DISCLAIMER

This product is intended for professional and/or home use. This product is not

intended for use in a medical environment and does not have the required

certifications for such use. Similarly, use aboard any aircraft or spacecraft

while in flight or as an adjunct to any surface, airborne or marine navigation

system or any offshore marine activity, including control of any watercraft, or

any use similar to those specifically herein mentioned is prohibited. Use in the

aforementioned circumstances would require additional testing and

certification.

You have not become the owner of any software - you have merely

purchased the right to use the software. You may make one copy of the

software for your own use. Other copies will be deemed a breach of copyright.

No warranty is made either expressed or implied including but not limited to

any implied warranties of merchantability or fitness for a particular purpose. In

no event shall the supplier or manufacturer of this product be liable for errors

found within, or be liable for any direct, indirect or consequential damages or

loss in connection with the purchase or use of this hardware software or

manual. The sole and exclusive liability to the supplier and manufacturer

regardless of the form of action shall not exceed the replacement cost of the

materials described herein.

By using this equipment you have indicated that you have agreed to the terms

listed above. If you do not wish to agree or the above terms are contrary to

your conditions of purchase you may return the equipment, unused, to your

supplier. All trademarks and copyrights are acknowledged. E&OE.

1.1 Regulatory Agency Acceptance

European ‘CE’ Mark Statement

Emissions: BS EN 61000-6-3:2001 (Generic Immunity Standard for

Residential, Commercial and Light Industrial)

Immunity: BS EN 61000-6-1:2001 (Generic Immunity Standard for

Residential, Commercial and Light Industrial)

1.2 FCC Statement

Class A Device: This equipment has been tested and found to comply with

the limits for a Class A digital device pursuant to Part 15 of the FCC Rules.

These limits are designed to provide a reasonable protection against harmful

interference when the equipment is operated in a commercial environment.

This equipment generates, uses and can radiate radio frequency energy and,

if not installed and used in accordance with the Instruction Manual, may cause

harmful interference to radio communications. Operation of this equipment in

a residential area is likely to cause harmful interference in which case the user

will be required to correct the interference at his own expense.