Specifications

C2-6104A OPERATION MANUAL
44
This parameter controls whether the ‘welcome’ screen is displayed or not on power
up for units with an on-screen display – it can be disabled as required. This is useful
when a unit is installed as part of an overall system.
This parameter is available on certain units and controls how bright the LEDs on the
front panel appear.
This parameter is available on certain units and allows the LCD backlight to be
turned on and off.
This parameter is available on certain units and allows the LCD contrast (viewing
angle) to be altered.
This parameter is available on certain units and controls how bright the LEDs on the
front panel appear.
This menu item controls the type of serial port in use on certain units (not all units
support this feature). Options available are RS-232, RS-422 and RS-485. The
default is RS-232.
This menu item allows the adjustment of the serial baud rate used for RS-232
communications. The rate can be adjusted to 9600, 19200, 28800, 33600, 38800,
57600 and 115200. (This adjustment is provided for those instances where you
wish to use the RS-232 control system for your own purposes.) The default baud
rate is 57600.
System
RS232 baud rate [57600]
System
OSD on power up [On]
System
LED brightness % [ 90]
System
Serial type [RS-232]
System
LCD backlight [On]
System
LED brightness % [ 90]
System
LCD contrast [200]