Operation Manual

13
* Depending on version
DISC EJECT (CD PLAYER) (See page 3, figure
E)
• Flip down the front and press EJECT to remove
the CD from the player.
SWITCHING THE DISPLAY MODE (CD)
• Press once or repeatedly to switch the
display between track number/elapsed play
time, total track time, background station name
or frequency and sound style.
SWITCHING THE DISPLAY MODE (CD CHANGER)
• Press once or repeatedly to switch the
display between track number/elapsed play
time, disc number/total track time, background
station name or frequency and sound style.
SPECIAL FUNCTIONS
Setting the clock (manually)
• See 'SAM' (page 14), option 'CLOCKSET' .
Note :
You can select 12 hour or 24 hour clock display.
• See 'SAM' (page 14), option 'CLOCK' .
RDS clock (auto update)
You can select an automatic update of the clock
via the RDS radio signal.
• See 'SAM' (page 14), option 'CLOCK' .
– The transmitted time via RDS can be incorrect.
SDVC (Speed Dependent Volume Control)*
See 'INSTALLATION' (page 5) for connection
instructions.
To compensate for surrounding noise, this function
automatically increases the volume of the set with
respect to the car's speed. Four compensation
levels can be selected. Level 1 gives a small
increase while level 4 gives a greater increase.
See 'SAM' (page 14) option 'SDVC' to select the
level until you find one which suits your car.
To calibrate :
To avoid unnecessary distraction we advise
that this procedure is carried out with the help
of somebody else.
1 While stationary, hold down the ‘SAM’ key and
a short press on the ‘PWR’ key to switch on
the set.
2 The set mutes.
Display shows 'RECALIB' and
'50KM/H' (30 MPH) alternately.
3 Now drive to 50KM/H (30 MPH).
Always obey the highway code and current
traffic restrictions and conditions!)
4 Once 50KM/H (30 MPH) is reached, press
or key.
You hear a beep and display shows 'CALIB OK'.
5 Now turn the set off and then on again to return
to normal operation. Level 2 is chosen for SDVC
in 'SAM'.
004-16 Mid_Eng 11/26/02, 9:09 AM13