Operation Manual

13
* Depending on version
13
DISC EJECT (CD PLAYER) (See page 3, figure
D)
• Flip down the front by pressing
REL
button
CD will automatic eject out when the front is
flip down.
.
SWITCHING THE DISPLAY MODE (CD MP3*)
• Press the DISPLAY button once or repeatedly
to switch the display in following sequences:
total DIR number /total tracks in the disc
current DIR number/total tracks in the
current DIR
DIR name
ARTIST name
ALBUM name
TITLE name
sound style
clock
SPECIAL FUNCTIONS
Setting the clock (manually)
• See 'SETUP', option 'CLOCKSET' .
Note :
You can select 12 hour or 24 hour clock display.
• See 'SETUP' (page 14), option 'CLOCK' .
RDS clock (auto update)
You can select an automatic update of the clock
via the RDS radio signal.
• See 'SETUP' , option 'CLOCK' .
–
–
–
–
–
–
–
–
–
The transmitted time via RDS can be incorrect.
To calibrate :
To avoid unnecessary distraction we advise
that this procedure is carried out with the help
of somebody else.
1 While stationary, hold down the 'SOURCE' key
and turn on the set.
2 The set mutes.
Display shows 'RECALIB' and
'50KM/H' (30 MPH) alternately.
3 Now drive to 50KM/H (30 MPH).
Always obey the highway code and current
traffic restrictions and conditions!
4 Once 50KM/H (30 MPH) is reached, press
SOURCE key.
You hear a beep and display shows 'CALIB OK'.
5 Now turn the set off and then on again to return
to normal operation. Level 2 is chosen as default
value for SMART Volume after calibration.
SMART Volume*
See 'INSTALLATION' for connection
instructions.
To compensate for surrounding noise, this
function automatically increases the volume of
the set with respect to the car's speed. Four
compensation levels can be selected. Level 1
gives a small increase while level 4 gives a greater
increase. See 'SETUP', option 'S-VOL' to select
the level until you find one which suits your car.
SWITCHING ON/OFF DEMO MODE
While keeping the DISPLAY key pressed, switch
on the set. Release the DISPLAY key when you
see a change in the display. . The set remains
in the demonstration mode, even if you switch
the set off and then on again . perform
the same procedures to switch off the Demo
mode.
DEMONSTRATION MODE
In this mode, the display shows the main features
of the set.