Operation Manual

14
* Depending on version
SETUP
It is possible to modify many of the set's default settings according to your preferences via ' '.
• Long press on DISPLAY
SETUP
button to enter the 'SETUP' menu.
•
•
Press
or
to select one of the options in the menu you want to modify.
to select the value/setting.
• Long press on DISPLAY
button to exit the 'SETUP' menu.
The set automatically leaves this mode after 30 seconds if no key presses are made.
Option Value/Setting Usage
(
(
or
))
T A VOL [0 to 47] Select volume level of Traffic
Select the level of loundness control
Select 'LO ' if you will search only for strong stations during search
TA EON
Announcement, News bulletins
and Alarm messages.
Adjust the front and rear fader level of Traffic Announcement,
News bulletins and Alarm messages.
TA FAD [F7 to R7]
TA EON [DX LO OFF ]
LOUD [LOUD OFF,
START [1 to 47] – Select the start-up volume when power on.
– After modification of the start-up volume, if the set is
switched off and on within 10 minutes, the start-up volume
reverts to the last used volume setting.
– After modification of the start-up volume, if the set is
switched off and on after more than 10 minutes later, the
start-up volume is the level defined in 'SETUP'.
MUTE [0 to 16] Select the mute level.
S-VOL* [OFF , 1,2,3,4] – Select the SMART Volume compensation level (only when
connected and calibrated, see 'SMART Volume' in
'INSTALLATION' and 'SPECIAL FUNCTIONS').
Level 1 gives a s maller increase while level 4 gives a greater
increase with respect to the car's speed.
V olume Control)
'SPECIAL FUNCTIONS' (page 13)).
CLK [ON, OFF] Select 'ON' to activate CLOCK feature.
CLOCK [RDSCLOCK, Select 'RDSCLOCK' to activate RDS clock or "MANCLOCK'
MANCLOCK]
LOW,MID,HIGH ]
to set clock manually.
[CLOCKSET] If 'MANCLOCK' selected, set the time by:
1. Use to select the hour digit and turn the Rotary Knob to adjust.
2. Repeat stept to set the minutes digit.
[12HCLOCK, Select desired clock format.
24HCLOCK]
14
BEEP [0FF , 1, 2, 3, 4, 5]
DVC (Speed Dependent V
compensation volume level (only when connected and
T ALL A TION' (page 5) and
Select volume level of confirmation beeps.
CLOCK
FORMAT
TEL [TEL OFF,
– Select 'TEL OFF' if no car phone is connected to the set.
MUTE LO,
MUTE HI
]
to automatically interrupt the set's sound output when
using your car phone.
Turn the
Rotary Knob
Rotary Knob
– Select 'MUTE LO' or 'MUTE HI' (according to phone type)