English Français Deutsch Nederlands Italiano MS 4150 RS MP3 Owner’s manual and mounting instruction Mode d’emploi et manuel d’installation Bedienungs- und Einbauanleitung Gebruiksaanwijzing en inbouwhandleiding Istruzioni d’uso e d’installazione www.vdodayton.
Attention! Only use this system when it is safe to do so. It is more important to keep your eyes on the road and your hands on the wheel. Due to constantly changing traffic conditions, we unfortunately cannot guarantee 100 % precision under all circumstances. Attention ! N’utilisez le système que si vous ne mettez pas en danger votre vie ou celle des autres usagers de la route.
SDVC B A [A1] [A3] [A2] [A5] [A4] [A6] [A8] [A7] +12V RR Power Amplifier Tel.
MS 4150 RS MP3 Connector Overview ISO chamber A: Pin Connection A1 Input digital speedometer signal / SDVC / GALA A2 Switch input reversing signal (reversing light plus) A3 Switch input telephone mute function A4 + 12 V permanent positive; terminal 30 A5 Switch output for electronic antenna /relay motor antenna A6 Switch input pilot light A7 +12 V ignition positive / ACC; terminal 15 (without switch-off on starting engine) A8 Battery negative; terminal 31 ISO chamber B (loudspeakers): Conn
English Illustrations . . . . . . . . . . . . . . . . . . . Page 3 Sommaire . . . . . . . . . . . . . . . . . . . Page 77 Instructions de montage . . . . . . . . . . . Page 85 Mode d’emploi . . . . . . . . . . . . . . . . Page 91 Récapitulatif des menus . . . . . . . . . . . Page 145 Français Afbeeldingen . . . . . . . . . . . . . . . . Pagina 3 Inhoud . . . . . . . . . . . . . . . . . . . Pagina 217 Inbouwaanwijzing . . . . . . . . . . . . . Pagina 225 Gebruiksaanwijzing . . . . . . . . . . . .
Contents GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Notes on operating instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Class 1 laser product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Theft protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CONTENTS C-IQ – INTELLIGENT CONTENT ON DEMAND . . . . . . . . . . . . . . . . . . . . . . . . 39 C-IQ - Your key to map, traffic and travel information . . . . . . . . . . . . . . . . . 39 NAVIGATION . . . . . . . . . . Main control . . . . . . . . . Destination input . . . . . . . Destination input menu . . . Special destinations (POIs) . . Via point input . . . . . . . . Guidance . . . . . . . . . . . Route selection . . . . . . . . Information during guidance Traffic information . . . . . .
English GENERAL INFORMATION Notes on operating instructions The following reading aids are used to simplify these operating instructions: ☞ requests you to perform an action. : shows the unit’s reaction. ✎ provides additional information – identifies a list. A Safety instructions and warnings contain important information for the safe use of the unit. Failure to observe this information may result in a risk of damage or injury. Therefore, please observe this information with particular care.
GENERAL INFORMATION Safety instructions A The use of the navigation radio by no means relieves the driver of his/her responsibilities. The highway code must always be observed. Always observe the current traffic situation. A The applicable traffic regulations and the prevailing traffic situation always take precedence over the instructions issued by the navigation system if they contradict one another.
How does the navigation system work? The position and movements of the vehicle are recorded by the navigation system’s sensors. The distance travelled is determined by the vehicle speedometer signal, rotary motion in curves is detected by a gyro sensor (inertial compass). The position is determined via the GPS (Global Positioning System) satellites. The position can be calculated within a range of approx. 10 m by comparing the sensor signals with the digital map on the navigation CD.
GENERAL INFORMATION The digital road map To be able to plan a route to a destination address, the navigation system not only requires the current position of the vehicle but also a digital road map containing the destination address itself and the roads leading to the destination address. This digital road map is on the map CD which you insert into the navigation computer. Real road network Digital line model The road system is stored on the map CD as a line model, i.e.
English GENERAL INFORMATION Route & Sound - Navigating and listening to an audio CD With the new generation of our navigation radio units, you may insert a map CD, plan your route, then insert an audio CD and the system will still guide you to your intended destination. The navigation computer saves the road system in a defined area around the planned route (corridor) in its main memory. Within this corridor, the map CD does not have to be inserted in order for the navigation to function.
GENERAL INFORMATION RDS (Radio Data System) Many FM stations transmit RDS information.
IMPORTANT INFORMATION Please read this information carefully and follow the all the instructions outlined below. This will ensure the reliable operation and long service life of your navigation radio. Keep the packaging and operating instructions in a safe place in order to pass them on to a subsequent owner in the event of selling the unit at a later date. A A A Only trained specialists may install the unit. Observe automotive industry quality standards.
INSTALLATION INSTRUCTIONS Connection overview, ISO chamber A, Fig.
■ Reversing signal (A2): ☞ Connect pin A2 to a suitable reversing signal point (positive lead of reversing lamp). Note: Operation of the navigation system is not possible without a reversing signal. The absence of a reversing signal may lead to inaccurate navigation. ■ Telephone mute function (A3), optional: ☞ Connect pin A3 to the mute function output of the car phone or the hands-free unit.
INSTALLATION INSTRUCTIONS Optional connections ISO chamber C, Fig. 4 - 6 ■ Line-out (yellow connector C1): (adapter cable, accessories) An amplifier with additional loudspeakers can be connected to the unit via this connector. ■ Telephone input (green connector C2): (adapter cable, accessories) ☞ Connect the loudspeaker output of your mobile phone or hands-free unit to lead C2. ✎ For information about setting the telephone attributes, refer to “INITIALISATION” in the operating instructions.
English INSTALLATION INSTRUCTIONS Install installation bracket, Fig. 8 - 10 The navigation radio can be installed into a vehicle’s DIN radio slot using the installation bracket provided. ■ Note before installing, Fig. 13: ✎ The radio must be installed horizontally. Deviations of - 10 to + 30 degrees can be set in the “Mounting angle” menu (see “Initial operation”). Larger deviations may result in malfunctions.
INSTALLATION INSTRUCTIONS ■ Setting the mounting angle In order to ensure perfect functioning of the system, the navigation radio must be set to the actual mounting angle in the instrument panel. 1. In navigation mode: Select the “Mounting angle” option in the “System settings” menu. 2. Depending upon the installation, set the angle to between -10 and +30 degrees. The system does not differentiate between negative and positive angles. Thus, even for a mounting angle of e.g.
English OPERATION Control elements 15 1 14 MUTE 13 RADIO 12 11 10 BAND 9 ALT-R NAV MS 4150 CD.C SOUND CLEAR FO IN 1 4 2 POWER 3 5 3 VOLUME 4 8 M EN U 2 6 5 SCAN 6 7 1 o . . . . . . . . . . . . Release button for operating panel 2 SOUND . . . . . . . . Opens the “SOUND” menu. ➽ page 27. 3 POWER/VOLUME . Press: Switching on / off . . . . . . . . . . . . . . Turn: Setting the volume 4 INFO . . . . . . . . . . Opens the “INFORMATION” menu. ➽ page 25. 5 1 ... 6 . . . . . . . . .
OPERATION Inserting a CD 1. Open the front panel. 2. Insert the CD into the drive (printed side up). For audio CDs, playback starts automatically. 3. Close the front panel. Removing a CD 1. Open the front panel. 2. Press the eject button. 3. Carefully remove the CD and close the front panel. Switching on / off ☞ Press the POWER/VOLUME knob to switch the unit on or off. Volume A When setting the volume, please make sure that traffic noises (horns, sirens, emergency vehicles, etc.) are still audible.
English OPERATION Menu operation Cursor System settings Guidance screen Dyn. route sett. Language Measuring units The currently selected line or field on the screen is designated as the cursor. The cursor is identified by an inverse field (bright letters on black background). ☞ Move the cursor by turning the right rotary control. ☞ Confirm by pressing the right rotary control. : To confirm, the cursor will be displayed briefly as a frame around the selected field.
OPERATION Options for entering characters The line at the bottom of the display displays command symbols which allow you to perform the following functions: c : Destination country selection (in this case, “D” for Germany). ƒ : Save an address in the personal address book. ‰ : Jump to menu “Special dest.”. ➽ page 48. ¡ : Delete the character entered last. Š : Direct input of road name without previously entering the name of the city (depending on map CD).
English “INFORMATION” MENU The “INFORMATION” menu The “INFORMATION” menu allows you to configure the type and amount of information the unit will receive via the radio data system (RDS). ☞ Press the INFO button. : The “INFORMATION” menu is displayed. INFORMATION TMC Scan TA Scan News Ann.
“INFORMATION” MENU Behaviour of TMC and TA If you switch on TMC Scan, you ensure that the radio will only search for stations transmitting TMC data during the automatic search. If the reception quality of the TMC station deteriorates drastically, the unit will indicate this by outputting a warning message. If you do not need guidance or are listening to an audio CD, yet you do not wish to go without current traffic announcements, switch on the TA Scan function.
English SOUND SETTINGS The “SOUND” menu In the “SOUND” menu, you can set your navigation radio’s sound and several other sound reproduction parameters to your own preferences. The sound settings for bass and treble/tone are valid for the currently active sound source (radio, CD or CDC). ☞ Press the SOUND button. : The “SOUND” menu is displayed.
SOUND SETTINGS SDVC (speed-dependent volume increase) To compensate for environmental noise, the volume for audible information increases as a function of the speed. ☞ Choose a setting for the speed-dependent increase of the volume. ☞ Select OFF to deactivate the function or select 1 to 5 to choose the desired volume increase. 1 is the lowest, 5 the highest volume increase.
English RADIO Listening to radio Time of day Waveband Frequency TA/TMC: Traffic Announcement / TMC (see “INFORMATION” menu) 13:29 FM A t RADIO DX 6 105.9 FFH Station name (only for RDS stations) CD symbol flashing: Route being planned. Do not remove map CD! Preset number Selected search sensitivity (during automatic search tuning) Selected search type If the unit is not yet in radio mode: ☞ Press the RADIO button. Select waveband In radio mode: ☞ Press the RADIO button again.
RADIO Setting frequency manually ☞ ☞ ☞ ☞ ✎ Activate “Manual tuning” in the radio menu. ➽ next page. Slowly turn the right rotary control to the right or left in order to change the reception frequency step-by-step. Turn the control quickly by a few notches in order to start a fast search. Press the control to stop the search. Press the control again to return to the automatic search. After 50 seconds, the radio switches back to automatic waveband tuning.
English RADIO Manual Tuning ☞ Select this option to set a frequency manually, for example, if the desired station cannot be set using the automatic search function. See previous page for this function. PTY Search (only in FM) This function allows you to search for stations of the desired program type. ☞ Select the desired program type from the list. ☞ Press the right rotary control to start the PTY search. ✎ PTY is not supported by all RDS-stations and is not available in all countries.
CD PLAYER CD player CD Audio: CD title (only with CD text) MP3: directory name CD-Audio: Track and artist (only with CD text) MP3: File name or ID3 tag (if available) 10:44 x Rock Mix Ray Of Light Madonna T05 02:59 Elapsed track time Selected search and playback mode Track number You can play 12 cm audio CDs and discs with MP3 files on your CD player. A We strongly recommend only playing 12 cm CDs. Please do not use 8 cm CDs (neither with nor without adapter).
CD PLAYER English ■ ID3 tag display For MP3 CDs, the currently selected directory and x 14:41 below it the ID3 tag (title and artist) of the current Flag piece of music will be displayed. The Race ✎ When a new track is played, the file name is Yello shown briefly first, followed by the ID3 tag. 01:43 T123 ✎ The file name can be displayed briefly at any time by pressing the CLEAR button. ✎ If there is no ID3 tag, only the file name is displayed.
CD PLAYER The “CD” menu In CD player mode: ☞ Press the MENU button. : The “CD” menu is displayed. The following functions are available: CD Manual Search Random Repeat Track Track Scan Manual Search ☞ ☞ ☞ ☞ ☞ ✎ ✎ Activate this function in order to perform a manual search using the right rotary control. Turn the right rotary control one notch to the right or left in order to start the first level of the fast search forwards or backwards.
English CD CHANGER CD changer (accessories) CD title (only with CD Text or if CD title has been entered) Track and artist (only with CD text) Selected CD in magazine t 16:38 CD CHANGER Disc: T13 02:38 4 Elapsed track time Selected search and playback mode Track number A digital CD changer can be connected to the navigation radio. A We strongly recommend only playing 12 cm CDs. Please do not use 8 cm CDs (neither with nor without adapter). A A Do not load navigation CDs into the CD changer.
CD CHANGER The “CD CHANGER” menu In CD changer mode: ☞ Press the MENU button. : The “CD CHANGER” menu is displayed. The following functions are available: CD CHANGER Manual Search Random Repeat Track Track Scan Manual Search ☞ ☞ ☞ ☞ ☞ ✎ ✎ Activate this function in order to perform a manual search using the right rotary control. Turn the right rotary control one notch to the right or left in order to start the first level of the fast search forwards/backwards.
The “INITIALISATION” menu ☞ Select “Initialisation” in one of the following : menus: “RADIO”, “INFORMATION”, “CD” or “CD CHANGER”. The “INITIALISATION” menu is displayed. The “INITIALISATION” menu allows you to adjust the navigation radio to your needs. The following functions are available: INITIALISATION Beep Level: 1 Startup Vol.: 32 Clock Settings On Off Logic Telephone ☞ Adapt your unit’s telephone input to your car phone: – NONE: No car phone is connected to the unit.
INITIALISATION On Off logic ☞ Activate this function to limit the operation of the device to one hour after the ignition key is removed. Display Setting the display contrast and the display brightness. ☞ Set the contrast and brightness for the display between 0 and 31 as required. Loudspeaker Test ☞ ✎ ☞ Activate this function to control the loudspeaker connections and positions. You will hear several consecutive confirmation tones in turn from one of the four loudspeakers.
C-IQ - Your key to map, traffic and travel information With your navigation radio you get several CDs containing all the available map data of Europe, plus digital travel guide products and TMC data (for dynamic navigation). The information or products on the CDs are encrypted and, if required and after expiry of an activation period, can be activated* using an access code, subject to payment of a fee. Your advantages: – You only pay for the information that you actually use.
C-IQ – INTELLIGENT CONTENT ON DEMAND Registering the navigation system In order to activate other C-IQ products, you must register your navigation system with C-IQ Service. This also ensures that you will receive updated CDs on a regular basis, and will therefore always be using the latest maps (does not apply to unlimited activation). Registering the system also provides you with additional anti-theft protection.
My C-IQ You have the choice of obtaining information about your activation status at any time. ☞ Select “My C-IQ” in the “C-IQ” menu. ☞ Select “Active products” if you wish to find out more about the products you have activated. ☞ Select “Starting soon” if you wish to view details of products you have received which will soon be active. ☞ Select “Expiring soon” if you wish to find out which service products you currently have in use and for how long they will continue to be available.
C-IQ – INTELLIGENT CONTENT ON DEMAND Preview Together with your map and travel information software you will also receive the opportunity to inspect different products free of charge before ordering them. You can have the system display the status of this preview: ☞ Select “Preview” in the “C-IQ” menu. : You will see the status of your preview options. It contains the number of map and travel information products that you are still able to test free of charge.
Info Points function Visual and audible indication of important points along your route. Different providers of travel and traffic information have optimised these specifically for navigation systems. This includes information about fixed speed camera installations or other safety relevant information (e.g. schools, kindergartens, etc.) and places of interest to tourists. If you have activated such a product by means of a C-IQ access code, the Info Points function can be activated and deactivated.
NAVIGATION Main control A map CD must be inserted into the CD player for some of the functions in navigation mode. If the unit is not yet in navigation mode: ☞ Press the NAV button. : The navigation main control is displayed. The following items are available in the main control: Destination input Opens the “Destination input” menu. Here, a destination address can be entered for guidance. ➽ page 45.
Destination input Destinations may be entered in several ways: – Entering city, road and house number or junction by means of the “typewriter.” See the following page. – Loading an address stored in the personal address book. ➽ page 65. – Recall one of the last 20 addresses used for guidance. – Selecting a specific destination (e. g. hotel, petrol station, railway station) from the database on the map CD. ➽ page 48. – Entering the geographic coordinates (GPS position) directly, e. g.
NAVIGATION st 1 step: City or postal code ☞ : ☞ Select “New address” in the destination input menu. The display automatically shows “City:” and the typewriter window, the name of the last destination city is already displayed. If you want to enter a destination address in the city shown, simply select “–” (only available if map CD is inserted), City:W_ A...E... I .....O.. ...U...Y...
NAVIGATION English nd 2 step: Road : ☞ Once the city has been entered the input wizard automatically jumps to the “Road:” input menu. Enter the name of the road using the “typewriter” or select a name from the list using ¯. rd 3 step: House number or junction If house numbers are available for a selected road, they can be entered with a separate input menu. If no house numbers are available, the system automatically jumps to the “Junction” input menu.
NAVIGATION Special destinations (POIs) You may also input the destination address by selecting special facilities (POI = Points of Interest) stored in the database. These include e.g.: – airports, – hotels, – petrol station, – car repair garages – car parks, etc. Depending upon the information already entered in the destination input screen, a list of general interest facilities appears which are present on the current map CD. ✎ Destination input via POI s is only supported if the map CD is inserted.
Special facilities in the vicinity of the current position You may also set a destination address by selecting a special facility in the vicinity of the current vehicle location. ☞ Select “Info on car pos.” in the destination input menu. : A list of categories of special facilities is shown. ☞ Select the required category. : A list of facilities pertaining to the selected Railway station category, located in the vicinity of the current BAHNHOF WILHELMSDO vehicle location, appears.
NAVIGATION Via point input If you wish to visit other locations en route to the Via point input entered destination address, these can be stored as New address via points. The navigation system then plans the route Load address to include the via points in the given sequence before the destination address is reached. Last destin. When you reach a via point, you will hear “You have Info on car pos. arrived.
Delete via points not reached Via point which you have not reached or which are no longer desirable to you must be deleted from the via point list so that the navigation system may plan the route to the next via point or to the final destination. If a not reached via point is not deleted, the system will continue to try and guide you to this via point. Via points can be deleted in the address manager or on the “Via points” information screen, ➽ page 65 or page 58.
NAVIGATION Guidance Guidance screen The guidance screen appears as soon as you activate the guidance. The guidance screen displays the following information: 9 8 7 ! AVORY RD 6 16.6km 6600 m 250 m 5 Z ª 5,6 km U I 14:45 4 Accident Zª UI 3 2 1 11 10 1 Road direction arrow: The arrow indicates the course of the road. 2 Simplified presentation of the next turn-off prompt (early warning). 3 Status field.
English NAVIGATION 9 Stationary traffic display: As soon as any traffic obstructions reported by TMC pertain to the planned route, a brief message appears, indicating the distance to the nearest obstruction and its type. This function can be activated/deactivated from the menu “Settings -> Guidance screen”. ➽ page 69. 0 As you approach a crossroads or junction, the detailed turn-off prompt will be displayed here. In addition, directional changes are announced with audible messages.
NAVIGATION Audible messages During guidance, the navigation radio will provide acoustic routing information in addition to the symbols on the guidance screen. Commonly, the directive to turn into another road consists of two voice messages: an early warning e.g. “Right turn ahead” and the instruction to turn e.g. “Turn right in 200 metres” AVORY RD. 2200 m Z ª 7,6 km U I 14:45 AVORY RD.
English NAVIGATION Road direction arrow On longer route segments without junctions or crossroads, an arrow is displayed indicating the course of the road over the next 100 m or so. In addition, a reduced diagram of the next turn-off prompt appears on the left, above the route direction arrow. Thus, the driver is always warned in advance of the next change of direction. Shortly before the change of direction, the detailed turn-off prompt appears.
NAVIGATION Route selection During guidance, you may also modify the route criterion and activate or deactivate dynamic route planning. The system will then plan a new route taking into account the new setting of the current position of your car. ☞ In the guidance screen, select the symbol for route selection (on the basis of the setting in the destination input U, V, W or X).
Information during guidance During guidance, you can call up several information screens: ☞ Move the cursor to the ™ symbol and confirm. ☞ The list of information menus appears. The following information menus are available: Travel data Route list Event on the route Destination Via points 2 Route list This option is available as soon as a route has been planned. The list of segments of the planned route appears. ☞ You can scroll through the list by turning the right rotary control.
NAVIGATION Displaying/deleting via points If via points have been entered for the current destination, the “Via points” option will be active. The number of via points still to be reached also appears. ☞ Select the required via point from the list in order to view details or delete it. Via points WETZLAR DARMSTADT > > Destination Display of current destination address with Name (if entered), country code, city, road, and junction.
English NAVIGATION Traffic information Use the “Traffic info” option in the main control to obtain information about traffic conditions in three different categories: – At the car position – At the destination – On the route ✎ ✎ ✎ Traffic info At position At destination On the route To access traffic information, the radio must be tuned to an RDS TMC station.
NAVIGATION ☞ : : ☞ By turning the right rotary control, you can access two further screens containing details about the selected traffic obstruction. The second details screen indicates the section in which the traffic obstruction is located and the third, the information about the obstruction provided by the TMC provider. If there are traffic obstructions on the route, the navigation system will also show you the estimated delay that they are likely to cause. This is shown in the third details screen.
Dynamic guidance with TMC With RDS TMC (Traffic Message Channel), the current traffic situation is taken into account when planning the route to your destination. You will be informed, for example, of accidents, congestion or construction sites as soon as such a traffic situation occurs. If you approach the traffic obstruction, the automatic detour option is activated and the navigation system will plan, if required, an alternative route.
NAVIGATION Bypassing a traffic obstruction locally When you approach the last exit before reaching a traffic obstruction, the navigation system will alert you and offer you the option of planning a detour route. As soon as a traffic obstruction is detected on your route and the detour option is displayed on the guidance screen: ☞ : ☞ ☞ : ☞ ✎ ✎ ✎ 62 Confirm the detour option in the top line of the guidance screen. The detour menu is displayed.
Dynamic route planning Unlike dynamic guidance, which provides information about traffic conditions on your route and on request about local traffic conditions, dynamic route planning takes into account the whole of the current traffic situation in a configurable area (horizon) in the vicinity of the current position of the car. If a traffic obstruction (e.g. stationary traffic) is reported via TMC for the planned route, the navigation system will analyse the information and calculate the anticipated delay.
NAVIGATION Alternative route During guidance, you can cause the navigation system to plan an alternative route. Use this function if, for example, you want to avoid stationary traffic not reported via TMC or if you wish to plan an alternative route. The alternative route will be calculated for a selectable distance from the current position of the car. ✎ This function is only available if the map CD is inserted. ☞ Press the ALT-R button.
Address manager The navigation radio offers the opportunity of storing at least 30 destination addresses in a personal address book. In the address book, you can store your destinations separately under the categories “Private” and “Business”. The “Home” and “Work” shortcuts, which can be programmed with your home address and business address respectively, are also available here. ☞ : Select “Address manager” in the main menu and confirm the selection. The address manager is displayed.
NAVIGATION Store current loc. Would you like to store a favourite restaurant in the destination memory? You can store the current position of your car as follows: ☞ Select “Store current loc.” in the address manager. ☞ Select which address books the address should be stored in (private, business, home or work). : The name input menu appears. ☞ Enter a name and complete the input with “o”. ✎ If you do not wish to enter a name, select “o” directly. : The current vehicle location is stored as an address.
Emergency menu ☞ In the main control, select “Emergency”. : The “Emergency” menu is displayed. The following options are available in the “Emergency” menu: English NAVIGATION Emergency GPS position Car position GPS position Display of the current geographic vehicle location as calculated by the Global Positioning System. Longitude, altitude and elevation above sea level (provided adequate GPS reception is available) will be displayed.
NAVIGATION System settings To customise the navigation functions to your own needs, you can change several settings. ☞ In the main control, select “Settings”. : The “System settings” menu is displayed. The following information screens are available: System settings Speed Guidance screen Dyn. route sett.
NAVIGATION English ■ Limit (xx/h) This enables you to specify a value manually so that a speed warning will be given if you exceed this speed (useful if using winter tyres, for example). ☞ Select “Limit (xx/h)” and set the desired limit for the fixed speed warning. ☞ Select “OFF,” if you wish to deactivate the speed warning. ■ Aud. Warning ☞ Select “Aud. warning” to activate and deactivate the audible speed warning for the legal and manually set speed limit.
NAVIGATION ■ Delay Use this value to indicate the anticipated delay time due to a traffic obstruction at or above which the navigation system should suggest that a new route be planned. Select a value between 5 and 60 minutes. ✎ The anticipated delay is calculated on the basis of the data received from the TMC station and may deviate from the actual situation. ■ Automatic Switches the automatic mode for dynamic route planning on/off. ✎ Automatic mode is switched off in the factory settings.
Service For diagnosing hardware and software problems (code-protected). The option “Service” is exclusively reserved for service work on the navigation radio performed by an authorised service company. System information The “System information” menu displays information about the software and hardware version (for service purposes). Info Points To activate/deactivate the Info Points function. ➽ page 43. ✎ In order to be able to use the Info Points function, you must have C-IQ Info Points data activated.
TROUBLESHOOTING In rare instances, your navigation radio may not function the way you expect it to. Before calling the service department, please read the operating instructions thoroughly and go through the following check list; it may be possible to quickly remedy an apparent malfunction. Symptoms Possible cause / remedy General Navigation radio not functioning. No display. • Check the fuse (unit and vehicle) and the connections (see installation instructions). Audio or map CD rejected by the unit.
Symptoms Possible cause / remedy Navigation Display shows “Please insert map CD”. The map CD is required for some functions in navigation mode. • Insert the C-IQ map CD into the radio CD drive with the label facing upwards. The number of satellites in the “GPS/Compass” information menu is 0. • Ensure that the GPS antenna is not being obstructed by any objects. • Move the vehicle outdoors if you are in a garage, a car park or a tunnel. The directions cannot be heard or are very quiet.
TIPS & TRICKS Tips for convenient operation ■ Cross-border guidance Owing to the high data volume, the European navigation data is stored on several CD ROMs (map CDs). In order to nevertheless achieve cross-border guidance, the most important European cities and roads (Major Roads Europe) are additionally stored on the map CDs at present. In order to enable cross-border navigation, the C-IQ content must be activated for the destination and transit countries.
English MENU OVERVIEW RADIO - Menu RADIO BAND SOUND RDS MEMO FM A SOUND SETTINGS Bass AUTOSTORE FM B LOUDNESS Treble STATION LIST FM AST User SOUND STYLE Balance PRESET LIST MW Flat SDVC Fader MANUAL TUNING MW AST Jazz SOUND SETUP PTY SEARCH SW Vocal INITIALIZATION RADIO SETUP LW Pop Leveller Classic Loud low Rock Loud high INITIALIZATION Sound reset Bass freq. Treb freq.
MENU OVERVIEW NAV DESTINATION INPUT VIA POINT INPUT New address GUIDANCE Country Load address TRAFFIC INFO Route list City Last destin. ADDRESS MANAGER Event on the route Road Info on car pos. C-IQ Store address Destination EMERGENCY Delete address Car position STOP GUIDANCE Delete via points GPS / Compass SETTINGS Store current loc. Trip computer GAMES Delete last dest.
Car Multimedia Systems. 043653105374 A2C53105374 VDO Dayton. The Car Brand.
