Specifications
S E C U R I T Y T A R G E T D T C O 1 3 8 1 , R e l e a s e 1 . 3 v
Designed by
Date
Department
Released by
Winfried Rogenz
Date
2007-11-14
Department
SV CV Div TCO LRH
Designation
Security Target DTCO 1381, Release 1.3
Document
40225345 SPE 000 AA
Version
Pages
10 / 52
Observe
Protection marks for restricting the use of documents and products
(DIN 34: 1998-01)
The copying, distribution and utilization of this document as well as the
communication of its contents to others without expressed authorization
is prohibited. Offenders will be held liable for the payment of damages.
All rights reserved in the event of the grant of a patent, utility model or
ornamental design registration.
Observe
Protection marks for restricting the use of documents and products
(DIN 34: 1998-01)
The driver can enter, in real time, the following two specific conditions: “OUT OF SCOPE” (begin, end)
and “FERRY / TRAIN CROSSING”.
(7) company locks management
This function of the TOE manages the locks placed by a company to restrict data access in company
mode to itself. Locking-in is possible at the insertion of a company card.
Locking-out is only possible for the company whose lock is “in” or if another company locks in. A pre-
vious locked-in company will then be automatically locked-out.
(8) monitoring control activities
This function of the TOE monitors DISPLAYING, PRINTING, VU and card DOWNLOADING activities
carried out while in control mode. This function also monitors OVER SPEEDING CONTROL activities
while in control mode.
(9) detection of events and/or faults
The following events and faults are detected and stored:
"Insertion of a non valid card" event
"Card conflict" event
"Time overlap" event
"Driving without an appropriate card" event
"Card insertion while driving" event
"Last card session not correctly closed" event
"Over speeding" event
"Power supply interruption" event
"Motion data error" event
"Security breach attempt" event
"Card" fault
"Recording equipment" fault includes
internal fault
Printer fault
Display fault
Downloading fault
motion sensor fault
Additional specific faults (e.g. CAN-transmission-fault) are also detected and stored in the TOE.
(10) built-in and self tests
The TOE is provided with the capacity to detect automatically system malfunctions related to firmware,
external data memory, chipcard interfaces, downloading and the motion sensor.
(11) reading from data memory
The TOE is able to read any data stored in its external data memory.