Specifications
S E C U R I T Y T A R G E T D T C O 1 3 8 1 , R e l e a s e 1 . 3 v
Designed by
Date
Department
Released by
Winfried Rogenz
Date
2012-04-25
Department
I CV AM TTS
LR
H
Designation
Security Target DTCO 1381, Release 1.3v
Document
40225345 SPE 000 AB
Version
Pages
35 / 52
Observe
Protection marks for restricting the use of documents and products
(DIN 34: 1998-01)
The copying, distribution and utilization of this document as well as the
communication of its contents to others without expressed authorization
is prohibited. Offenders will be held liable for the payment of damages.
All rights reserved in the event of the grant of a patent, utility model or
ornamental design registration.
Observe
Protection marks for restricting the use of documents and products
(DIN 34: 1998-01)
ACT_203
The VU shall ensure that workshops are accountable for their activities (requirements
098, 101 and 109).
requirement 098 in
2
:
The following data shall be recorded for each of these calibrations:
-
Purpose of calibration (activation, first installation, installation, periodic inspection, other)
-
workshop name and address,
-
workshop card number, card issuing Member State and card expiry date,
-
vehicle identification,
-
parameters updated or confirmed: w, k, l, tyre type, speed limiting device setting, odometer
(old and new values), date and time (old and new values).
requirement 101 in
2
:
The following data shall be recorded for each of these time adjustments:
-
date and time, old value,
-
date and time, new value,
-
workshop name and address,
-
workshop card number, card issuing Member State and card expiry date.
requirement 109 in
2
:
The recording equipment shall update data stored on valid driver, workshop and/or control cards
with all necessary data relevant to the period while the card is inserted and relevant to the card
holder. Data stored on these cards are specified in Chapter IV.
ACT_204
The VU shall ensure that controllers are accountable for their activities (requirements
102, 103 and 109).
requirement 102 in
2
:
The recording equipment shall record and store in its data memory the following data relevant to
the 20 most recent control activities:
-
date and time of the control,
-
control card number and card issuing Member State,
-
type of the control (displaying and/or printing and/or VU downloading and/or card download-
ing).
requirement 103 in
2
:
In case of downloading, the dates of the oldest and of the most recent days downloaded shall
also be recorded.
requirement 109 in
2
:
The recording equipment shall update data stored on valid driver, workshop and/or control cards
with all necessary data relevant to the period while the card is inserted and relevant to the card
holder. Data stored on these cards are specified in Chapter IV.