Manual

M1 WL

. LOCK . CLICK

. UNLOCK

UNLOCK

LOCK

Inserting the computer into the bracket

The VDO twist-click system securely connects the computer

to the handlebar bracket.

How to insert the computer:

STEP 1

Place the computer into the bracket in a 10 o’clock position.

STEP 2

Rotate the computer to the right into the 12 o’clock position

and click it into the bracket system. A noticeable resistance

must be overcome to move it into place.

STEP 3

To remove the computer, rotate it to the left (without pushing

or pulling).

Memory aid: Rigid to the Right, Loose to the Left

Testing the wireless transmission

Once attached, test the wireless transmission.

Do this as follows:

– Insert the computer into the bracket

– Lift and spin the front wheel

– An LED should ﬂash on the transmitter for a few seconds.

Flashing LED: the transmitter is sending a signal

– A speed should now be displayed on the computer.

If no speed is displayed, there can be several reasons for

this. The possible reasons are described in the “Trouble-

shooting” section.