NEDERLANDS Montagevideo Bedieningsvideo Instelvideo www.vdocyclecomputing.
M3 WR Voorwoord Hartelijk gefeliciteerd. Door te kiezen voor een VDO-computer hebt u een technisch en kwalitatief zeer hoogwaardig apparaat gekozen. Om de computer optimaal te kunnen benutten raden wij aan om deze handleiding zorgvuldig te lezen. U krijgt alle aanwijzingen voor de bediening en veel andere nuttige tips. Wij wensen u veel plezier met het rijden met uw VDO-computer.
M3 WR Inhoud Het display.............................................................. 04 Navigator ............................................................... 29 De knoppen ............................................................ 06 De navigator op nul terugstellen ............................. 30 De functies ............................................................. 07 De deeltrajectteller ................................................. 31 Oproepen van de totaalwaarden .................
M3 WR Het display De VDO M3 heeft een groot, zeer goed afleesbaar display. Het display kan in drie gedeelten worden onderverdeeld. Gedeelte 1: In het bovenste gedeelte van het scherm wordt permanent de huidige snelheid weergegeven. Gedeelte 2: In het midden verschijnt in tekst de beschrijving van de geselecteerde weergavefunctie. Gedeelte 1 Gedeelte 2 Gedeelte 3 Gedeelte 3: In het onderste gedeelte van het display wordt de waarde van de geselecteerde functie weergegeven.
M3 WR Het display In het linkerdeel van het scherm vindt u naast de snelheidsweergave de pictogrammen: „ ”: Het pictogram staat aan als de deelritteller is gestart. Een nadere beschrijving van de deelritteller vindt u op pagina 31. „ ” of „ ” De VDO M3 kan op 2 fietsen worden gebruikt. De pictogrammen 1 en 2 geven aan of uw VDO M3 momenteel met de instellingen voor fiets 1 of met die voor fiets 2 werkt. Hoe u de selectie voor fiets 1 of fiets 2 wijzigt, leest u op pagina 33.
M3 WR De knoppen De VDO M3 heeft 2 knoppen.
M3 WR De functies De VDO M3 heeft de volgende functies: Huidige snelheid De huidige snelheid wordt permanent op het scherm weergegeven. Bij een wielomtrek van 2155 mm bedraagt de maximaal mogelijke snelheid 199 km/u of 124 mph. Huidige afstand De huidige afstand (afstand van de huidige rit) telt tot 9999,99 km of mijl. Bij overschrijden van deze waarde begint de huidige afstandstelling weer bij nul. Huidige rijtijd De huidige rijtijd (rijtijd van de huidige rit) telt tot 99:59:59 UU:MM:SS.
M3 WR De functies Deeltijd De VDO M3 beschikt over een deelritteller. De deelritteller is te vergelijken met een stopwatch. Wanneer de deelritteller loopt, wordt net als bij een stopwatch de deeltijd gemeten. Bovendien wordt bij lopende deelritteller ook de deelafstand gemeten. De deelritteller wordt met de knopcombinatie BIKE + SET (beide knoppen gelijktijdig kort indrukken) gestart en weer gestopt. PAS OP: De deelritteller stopt automatisch wanneer de snelheid nul is.
M3 WR De functies Navigator De navigator is een TWEEDE, volledig onafhankelijke dagtrajectteller. De navigator dient om deeltrajecten te meten. Vooral wanneer u een rit volgens een „Roadbook” narijdt, is de navigator heel handig. De navigator kan: - onbeperkt vaak en onafhankelijk van de dagritteller op nul worden teruggesteld; - vooraf op een waarde ingesteld worden; - vanaf deze waarde vooruit of achteruit tellen.
M3 WR Oproepen van de totale waarden De totale waarden van de gereden afstand en de rijtijd worden gescheiden van de gegevens van de HUIDIGE rit opgeroepen. Houd daartoe de SET-knop ingedrukt tot het menu opent. Met de SET-knop opent u de weergave van de Totals (totaalwaarden). Met de BIKE-knop bladert u naar de Totals. Eerst wordt de totale afstand 1 (de som van alle ritten met fiets 1) weergegeven. Totale afstand 1 (som van alle dagritten met fiets 1) De totale afstand telt tot 99999 km of mijl.
M3 WR Oproepen van de totale waarden Wanneer u ook met fiets 2 op weg bent geweest, worden bij verder bladeren met de BIKE-knop hier ook de waarden voor fiets 2 weergegeven. Met de BIKE-knop bladert u verder naar de totale afstand fiets 2 Met de BIKE-knop bladert u verder naar de totale rijtijd fiets 2 Met de BIKE-knop kunt u ook de Totals (som van fiets 1 en fiets 2) oproepen. Met de SET-knop (ingedrukt houden) komt u vanuit de weergave van de totaalwaarden terug naar de normale functiemodus.
M3 WR Het bedienen tijdens het rijden Tijdens het rijden kunt u de weergavefuncties met de knop BIKE oproepen (vooruit bladeren door de functies). SET Door kort te drukken op de knop BIKE brengt u de volgende functie in beeld. Door kort drukken op de SET-knop kunt u ook achteruit bladeren door de functies. Zo brengt u snel de gewenste functie in beeld. BIKE Slaapmodus Wanneer u pauze neemt en de M3 nog in de stuurhouder zit, gaat de computer na 5 minuten in slaapmodus.
M3 WR Montage van de houder en de sensor Begin met de montage van sensor en magneet. SENSOR 1 STAP 1 Plaats het onderlegrubber onder de sensor. Monteer de sensor op dezelfde kant van de vork waar u later de computer op het stuur wilt monteren (rechts of links) met de meegeleverde kabelbinder (eerst losjes, nog niet vastzetten). 3 PAS OP: De sensormarkering op de sensor moet daarbij in de richting van de spaken wijzen.
M3 WR De computer in de stuurhouder plaatsen Met het VDO Twist-Click-systeem zit de computer stevig vast in de stuurhouder. Dat gaat zo: STAP 1 Plaats de computer in 10 uurstand op de houder. STAP 2 Draai de computer naar rechts naar 12 uurstand en laat hem in het houdersysteem inklikken. U moet bij het indraaien een voelbare weerstand overwinnen. Lock UnLock 1. Lock 2. Click STAP 3 Wilt u de computer uitnemen, draai hem dan naar links (niet drukken of trekken).
M3 WR De instellingen - Taal Bij de VDO M3 kunt u de volgende talen instellen voor het scherm: - Duits - Engels - Frans - Italiaans - Spaans - Nederlanders - Pools Dat gaat zo: Houd de SET-knop ingedrukt tot het instelmenu opent. U ziet op het scherm eerst Totals (totaalwaarden). Met de BIKE-knop bladert u naar de instelling. De instellingen opent u met de SET-knop. „Language” staat op het scherm. Met SET opent u de instelling voor de taal. „English” knippert.
M3 WR De instellingen - Taal Met de BIKE-knop kunt u nu een andere taal selecteren. Met de SET-knop bevestigt u uw taalkeuze. Op het scherm krijgt u de melding Set OK. Wanneer u nog meer instellingen wilt configureren, gaat u met de BIKE-knop naar de andere instellingen. Wanneer u geen andere instellingen wilt configureren, houdt u de SET-knop ingedrukt. Het instelmenu sluit. De VDO M3 keert terug naar de functiemodus.
M3 WR De instellingen - Maateenheid In de instelling voor de maateenheid legt u de maatindelingen vast voor: - Snelheid (km/u of mph) - Temperatuur (C of F) - Kloktijd (24 uur of 12 uur met vm/nm) Dat gaat zo: Houd de SET-knop ingedrukt tot het menu opent. Vanaf Totals bladert u met de BIKE-knop naar instelling. Met de SET-knop opent u de instellingen. Op het scherm verschijnt „Language“. Met de BIKE-knop bladert u naar de instelling voor de Meting (maateenheid).
M3 WR De instellingen - Maateenheid Op het scherm verschijnt nu de instelling voor de maateenheid voor de urenindeling. Hier kunt de 24 uursof de 12 uursindeling met vm/pm-weergave instellen. De keuze bevestigt u met de BIKE-knop. Met de SET-knop bevestigt u uw keuze. Op het scherm krijgt u de melding Set OK. Wanneer u nog meer instellingen wilt configureren, gaat u met de BIKE-knop naar de andere instellingen. Wanneer u geen andere instellingen wilt configureren, houdt u de SET-knop ingedrukt.
M3 WR De instellingen - Wielmaat/fietsmaat U kunt op de VDO M3 de omtrek van uw wiel in millimeters instellen of in een bandentabel de juiste band selecteren. Hoe preciezer u deze instelling configureert, des te nauwkeuriger is uw snelheidsweergave en de meting van de afgelegde afstand. In de tabel met wielmaten kunt u de waarde voor uw wiel aflezen en instellen. PAS OP: De waarden in de tabel zijn slechts richtwaarden.
M3 WR De instellingen - Wielmaat/fietsmaat Zo stelt u de wielomtrek in: Houd de SET-knop ingedrukt tot het menu opent. Met de BIKE-knop bladert u van Totals naar instelling. De instelling opent u met de SET-knop. Op het scherm verschijnt „Language“. Met de BIKE-knop bladert u naar de instelling voor de Wielomtrek (wielmaat). Met de SET-knop opent u de instelling voor de wielmaat. U kunt de wielmaat voor fiets 1 en fiets 2 apart instellen.
M3 WR De instellingen - Wielmaat/fietsmaat Handmatige instelling door invoer van de wielomtrek in millimeters/inch Millimeters Inch Voor mm: De eerste twee cijfers (in het voorbeeld „21”) knipperen. Met de BIKE-knop kunt u deze cijfers instellen op de door u gewenste waarde. Voor inch: De inch-waarde knippert. Druk op de BIKE-knop om de cijfers op de gewenste waarde in te stellen. Met de SET-knop bevestigt u uw instelling. Voor mm: Nu knippert het derde cijfer en kunt u de waarde invoeren.
M3 WR De instellingen - Wielmaat/fietsmaat Instelling van de wielmaat via de bandenlijst Open de instelling van de wielmaat via de bandenlijst met de SET-knop (zie pagina 20). Op het scherm ziet u SELECT. Met de BIKE-knop bladert u door de bandenlijst tot uw band wordt weergegeven (in dit voorbeeld 26 x 2,35). Met de SET-knop bevestigt u uw keuze. Op het scherm krijgt u de melding Set OK. Wanneer u nog meer instellingen wilt configureren, gaat u met de BIKE-knop naar de andere instellingen.
M3 WR De instellingen - Kloktijd U kunt op de VDO M3 de kloktijd in 12 uurs-vm/pm-indeling of in 24 uursindeling instellen. De tijdindeling legt u in de instellingen voor de maateenheid vast (zie pagina 17). Zo stelt u de kloktijd in: Houd de SET-knop ingedrukt tot het menu opent. Met de BIKE-knop bladert u van Totals naar instelling. De instelling opent u met de SET-knop. Op het scherm verschijnt „Language“. Met de BIKE-knop bladert u naar de instelling voor de Klok (kloktijd).
M3 WR De instellingen - Kloktijd Nu knipperen op het scherm de minuten. Met de BIKE-knop stelt u de minuten in. Weergave in 24 uursindeling Weergave in 12 uursindeling Met de SET-knop bevestigt u de instelling. Op het scherm krijgt u de melding Set OK. Wanneer u nog andere instellingen wilt configureren, gaat u met de BIKE-knop naar de andere instellingen. Wanneer u geen andere instellingen wilt configureren, houdt u de SET-knop ingedrukt. Het instelmenu sluit. De VDO M3 keert terug naar de functiemodus.
M3 WR De instellingen - Totaalwaarden/totale afstand U kunt op de VDO M3 de gereden totale afstand instellen. U kunt bijv. aan het begin van het nieuwe fietsseizoen uw gegevens invoeren. U kunt de totale afstanden apart voor fiets 1 en fiets 2 instellen. PAS OP: De M3 beschikt over een gegevensgeheugen. Bij het verwisselen van de batterij gaan geen gegevens verloren. Zo stelt u de totaalwaarden in: Houd de SET-knop ingedrukt tot het menu opent. Met de BIKE-knop bladert u van Totals naar instelling.
M3 WR De instellingen - Totaalwaarden/totale afstand Het linker cijfer knippert. Met de BIKE-knop kunt u de cijfers veranderen. Wanneer dit cijfer is ingesteld, bevestigt u de instelling met de SET-knop. Het volgende cijfer gaat knipperen en is gereed om in te stellen. Met de BIKE-knop verandert u deze cijfers. Wanneer ook dit cijfer is ingesteld, bevestigt u de instelling met de SET-knop. Het volgende cijfer knippert. Wanneer alle cijfers zijn ingesteld, bevestigt u de instelling met de SET-knop.
M3 WR De instellingen - Totaalwaarden/totale rijtijd Op de VDO M3 kunt u de totale gereden tijd instellen. U kunt hier de totale rijtijd (som van alle rijtijden van alle ritten) instellen, bijv. aan het begin van een nieuw fietsseizoen. De instelling kunt u apart voor fiets 1 en fiets 2 configureren. PAS OP: De M3 beschikt over een gegevensgeheugen. Bij het verwisselen van de batterij gaan geen gegevens verloren. Dat gaat zo: Houd de SET-knop ingedrukt tot het menu opent.
M3 WR De instellingen - Totaalwaarden/totale rijtijd Het volgende cijfer links gaat knipperen en is gereed om in te stellen. Met de BIKE-knop stelt u de waarde voor dit cijfer in. Met de SET-knop bevestigt u de instelling. Wanneer alle vier cijfers voor de uren zijn ingesteld, bevestigt u de instelling met de SET-knop. Daarna opent de instelling voor de minuten. Met de BIKE-knop stelt u de minuten in. Wanneer de minuten zijn ingesteld, bevestigt u de instelling met de SET-knop.
M3 WR De navigator instellen De navigator is een tweede, volledig onafhankelijke dagafstandteller. De navigator kan - willekeurig vaak tijdens een rit op nul teruggesteld worden; - op een afstandwaarde ingesteld worden; - vanaf de ingestelde afstandwaarde vooruit- of terugtellen. Het gaat zo: Breng de navigatorfunctie met de BIKE-knop op het scherm. Het instelbereik van de navigator: -99,99 tot +999,99 km of mijl.
M3 WR De navigator instellen Het tweede cijfer links knippert. Met de BIKE-knop verandert u de cijfers. Met de SET-knop bevestigt u de invoer. Wanneer alle cijfers zijn ingesteld, bevestigt u de invoer met de SET-knop. Op het scherm krijgt u de melding Set OK. De VDO M3 keert terug naar de functiemodus. De navigator op nul terugstellen De navigator kan willekeurig vaak tijdens een rit op nul worden teruggesteld. Het gaat zo: Breng de navigatorfunctie met de BIKE-knop op het scherm.
M3 WR Deelritteller De VDO M3 heeft een tijd- en afstandteller die net zo werkt als een stopwatch. Wanneer de deelritteller loopt, worden de tijd en de afgelegde afstand gemeten. De deelritteller starten Druk tegelijkertijd op de BIKE- en de SET-knop (kort). Op het scherm wordt onmiddellijk de deeltijd weergegeven en het pictogram voor de deelritteller is zichtbaar. Met de BIKE-knop kunt u naar de deelafstand bladeren.
M3 WR De deelritteller op nul terugstellen Voor het terugstellen moet ofwel de deeltijd of de deelafstand op het scherm worden weergegeven. Houd de BIKE-knop ingedrukt. Op het scherm verschijnt de tekst Trip Section RESET. Wanneer u de BIKE-knop nu ingedrukt blijft houden, worden de deelritgegevens op nul teruggesteld. De volgende gegevens worden op nul teruggesteld: - Deelafstand - Deelrittijd Ritgegevens op nul terugstellen Na elke dagrit kunt u de gegevens van deze dagrit weer op nul terugstellen.
M3 WR Fiets 1 of fiets 2 selecteren De VDO M3 kan op twee fietsen worden gebruikt. Voor elke fiets worden de gegevens gescheiden gemeten en opgeslagen. Hier stelt u in met welke fiets u momenteel wilt gaan rijden. Het gaat zo: Houd de BIKE-knop en SET-knop tegelijkertijd enkele seconden lang ingedrukt. De fietsselectie opent. De laatst gebruikte fiets wordt weergegeven. Met de BIKE-knop schakelt u nu over naar fiets 2 (of fiets 1 als eerst fiets 2 was geselecteerd).
M3 WR Batterij status-weergave De VDO M3 heeft een batterijwaarschuwing. Wanneer de batterij weinig spanning meer over heeft, krijgt u een waarschuwing op het scherm te zien. Wanneer u op een willekeurige toets drukt, verdwijnt deze melding. U hebt na een batterijwaarschuwing nog ongeveer 2 weken de tijd om de batterij te vervangen. De batterij van de computer vervangen Voor een probleemloos functioneren van de computer, raden wij u aan om de batterij jaarlijks te vervangen.
M3 WR Garantiebepalingen VDO Cycle Parts geeft voor uw VDO-computer een garantie van 2 jaar vanaf de koopdatum. De garantie geldt voor materiaal- en fabricagefouten aan de computer zelf, aan de sensor/zender en aan de stuurhouder. Kabels, batterijen en montagematerialen zijn uitgesloten van garantie. De garantie geldt alleen wanneer de betroffen onderdelen niet zijn geopend (uitzondering: batterijvak van de computer), geen geweld is gebruikt en geen moedwillige schade aanwezig is. Bewaar de kassabon a.u.b.
M3 WR Problemen oplossen Fout Mogelijke oorzaak Oplossing Halve segmenten op het scherm (bijv.
M3 WR Technische gegevens Computer: ong. 49 H x 33 B x 12 D mm Gewicht computer: ong. 30 g Gewicht stuurhouder: ong. 10 g Batterij computer: 3 V, type 2032 Batterijlevensduur computer: ong. 1 jaar (ong. 400 rij-uren, ong. 8000 km (5000 mijl)) Rijtijd-meetbereik: tot 99:59:59 UU:MM:SS. Dagritteller-meetbereik: tot 9.999,99 km of mi Navigator-meetbereik: van -99,99 tot +999,99 km of mi Meetbereik totale kilometers: tot 99.
M3 WR Correcte afvoer van dit product (elektronisch afval) (Van toepassing in landen van de Europese Unie en andere Europese landen met een systeem voor gescheiden inzameling) Het kenmerk op het product en op de bijbehorende documentatie geeft aan dat het na afloop van de levensduur niet samen met het normale huisvuil mag worden afgevoerd. Voer dit apparaat gescheiden van ander afval af, om het milieu en de menselijke gezondheid niet te beschadigen door ongecontroleerd afval weggooien.
Cycle Parts GmbH Le Quartier Hornbach 13 67433 Neustadt/Weinstrasse (Germany) +49 (0) 63 21- 95 82 7 - 0 www.vdocyclecomputing.